Recent content by HMC710

Hey Coy, yes there are two flow valves under the seat. One directly under the seat is 3pt down flow control. The other to the right is yet TBD.... on a kubota its a flow control valve (as I was told), but don't know if that is a global flow or 3pt flow. On my Farmtrac, pump output goes to the...

Thanks ptsg! I'll check them out and see if they look similar to existing. There is definitely a suction filter with label / instructions on cleaning schedule, I'll snap a pic next trip out.

I don't know if its an adjustable prv or flow control. Hopefully I'll get a response from Bucher. No luck on a manual yet and no response from Farmtracus.com H

Some success! Mapped things out today as best I could. Hyd filter was loose and leaking, so tightened that. Pump is mounted on the engine with front pump looks like going to power steering and rear pump goes to loader valve. Valve is Bucher Hydraulics and looks like they have a store relatively...

Looking through various hydraulic schematics, loader valves, etc. Going to map things out tomorrow and see how the plumbing looks. It acts like the 3 pt is plumbed after the loader valve and the PRV is set way too low. Hopefully something stoopid...... Thanks everyone! H

Thanks pt, appreciate the comments. You are correct on that loader, it get way up there! I'l see if there are any markings on the filters for cross referencing on the system. I printed out a generic hydraulic circuit, been a while since I've worked on a tractor.... The loader seems to have a...

Farmtrac FT26 was a brocure with general info. Ran the tractor today for a bit with rototiller to see how quick it would get hot. Made a few laps and temp got to the red so stopped tilling and let tractor idle and temps came back down. Pulled tiller off the back to see if 3pt would lift with...

I'll give that a try, thx! H

Interesting, thx. Hopefully that will ensure parts n service options are available. H

Hey All, just picked up a 2021 Farmtrac 25H that needs some TLC. I'm looking for a manual and parts source so I can get all filters changed. I sent an email to info@farmtracus.com and have not heard back yet. Tractor is a 2021 with under 200 hours, but looks a bit abused / overworked. First...