Recent content by HomerGuy

I'm certainly open to other suggestions. When you say "bar type" I assume that you mean something like the Carlisle AT101? I saw many good reviews on those, but they don't come in a size that I could make work. The only size with a 12" rim is also 12" wide, and I don't think my machine has...

I am looking to upgrade the tires on my Toro Titan HD 1500 Zero Turn (uses the ZT3100 transaxles). My property has some significant slope in portions of the backyard, and I frequently find myself sliding down the incline. Thankfully I have a safe landing zone at the bottom of the slope, but it...

Why would someone have an implement with category 2 diameter pins on category 1 spacing? I only ask because I just bought a used implement and didn't even notice this until I tried to connect it to my cat 1 tractor. The pin diameter is category 2 for the lift arms and top link, but they match...

The soil is rather sandy, with gravel and larger rocks mixed in. No hard clay here. Here is a photo of what it looks like after the bulldozer smoothed things out, and after I ran my tractor landscape rake over it (facing forwards and backwards). The tractor rake seemed to pull up a lot of...

I was going to rent it from Sunbelt in Dewitt. Not exactly around the corner from me, but I can't find many places that have them. Tool Time Rental in Highland also has one and is closer, to me but I find them to be expensive and not overly customer friendly. I have rented from Ward's several...

Hello, I have a freshly graded new construction yard. The excavation contractor did a nice job of finish grading with his bulldozer, and I'd like to run a harley rake/power rake over the whole area to give a nice seed bed for my grass seed. Can my Kubota B2601 (24.3 engine hp, 19.5 PTO hp)...

Thanks for the replies. I'll see if I can find someone to straighten them out. Looks like a new set is about $90.

I purchased this B2601 used. The backhoe was on when I purchased it 6 months ago and I just got around to taking the backhoe off and installing the three point. Are these stabilizer arms bent? When I looked at the machine before purchasing it, the previous owner had them off the tractor and in...

Can someone please confirm the dimensions of a Yanmar 324/424 TLB for me? I looked at them at the dealer, and really liked them. Seemed like a nice in-between size. I'm looking at the dimensions and trying to figure out where it would fit in my garage. If I'm reading the spec sheet correctly...

Hello there, I am trying to decipher a construction stake on my property. The stake reads: "3' OFF B/C P.C. LINE ONLY" My first thought was 3' off back of curb, but this stake is 15' from the curb, so that doesn't make much sense. Any idea what this means? Thanks!