hslogger's latest activity

Only time I run mine wide open is when I'm cutting down heavy or thick stuff that needs it. Rest of the time its half throttle at best...

For what it is worth from my experiences… Build your building with Eaves.

I have done a lot of this stuff doing residential tree work. We would use a throw ball and small line into neighboring large tree...

Or another thought is over time the shear bolt has wallowed out the shaft hole and has now created enough slop to hammer the bolt until...

Not a real good solution. You won’t get water to the surface until the area is totally saturated. Water follows gravity first and goes...

All true, but really depends as much on deck material and thickness, as fab'd versus stamped. You're equating fab'd decks with thicker...

I hired a leak detection guy from fifty miles away and it was worth it. He charged the system with helium.

Back in the eighties, I took a seasonal job with the local county parks department maintaining mostly rural parks, out of town, some...

Yes. And if possible try to return in better condition than how I received it

https://highgrademfg.com/tail-wheel-assemblies/ A stout 5 or 6/foot pry bar also makes it easy to shift rear implements back and forth...

That is a good and heavy stick. Use your drawbar a good cable or chain. If you want to minimize ground damage hang a block in a tree to...

I have a MX5200 which will move a surprising amount of log. I think the main issue will be the log sections not getting hung up on...

Low temp cure powder coating is just fine if applied correctly over cleaned and prepped metal, something trailer builders usually don't...

My 24 foot tilt bed had boards rotting. I needed 2x8x18 foot treated boards. I guess you can order from Lowes but I found a really good...