Recent content by Hydraman

Northern Tool\' Nortrac tractors--any good? Today a neighbor asked if I knew anything about Northern's Nortrac tractors and I said no. Does anyone have any kind of feedback that I could give him? Parts availability, problems, or what ever. All comments welcome if you have first hand experience...

Northern Tool\' Nortrac tractors--any good? china-ML-900851-ML- Posted in wrong forum

Today I built a skid plate/ guard for my 2210. I have read quite a bit about people wondering how to do it. This does have to be removed to use my MMM. However. I just use two 1/2 inch grade 8 bolts to hold it in place. I also welded a lug on each side to make contact with the frame rail to keep...

I am in need of a right angle drive gear box and drive shaft and the ones from a 54C or 62C JD mower deck would be just perfect. If anyone knows of, or has a used one that they are willing to part with, please contact me by PM. Thanks. Don

How does one engage the glow plugs on a 2210 for cold starting?? It seems as though the owners manual does not address this issue. Thanks, Don

I have a 1972 JD 3020 w/ approx. 5500 hrs on it. The "fuel shut off" is electric, and integral with the injector pump. Today I moved the tractor, and instead of the engine running at a constant RPM, it started running erratically, so I shut down the engine. When I attempted to restart, it...

As the USS Harry S Truman got underway on Fri. 20Dec 2002, there was an announcement on the ships intercom "PEACE ON EARTH TO MEN OF GOOD WILL--ALL OTHERS, STAND BY"

Does anyone have a website address for First Choice?? Or know where I can find their dealer network so I can find a dealer in my area?? Thanks in advance for any info!!

DON\'T Don't, Don't, Don't...... Nice afternoon so went out to check the gates on some fences out in the back "40" and ran into a small obstacle!!!!! to say the least!

I built a new bucket for my loader last year; and now have the old one just setting there, doing nothing, so I am thinking that if I can find the teeth and shanks I would weld them in place in my old bucket. Then all I would have to do is switch buckets to do my serious digging. But, I need to...