Yes you can. I have been using Walmart branded 20-50 in my Gt2542 ever since I first changed it around 150 hours. It is now over 1000 hours and hydro seems as good as new. I don't know if information is still there but when I decided to change my fluid even though operators manual didn't say to...
I cannot give any insight on early water pump failure. Also I don't see how the lift arms got bent as I routinely step on the step plate on deck to get on my mower even if it is in raised position so I know the arms are very strong. I do have some comments on the gearbox failure. Mine is a F2680...
I had my engine out for several weeks to get it rebuilt and I can not figure out the placement of one of the springs.
I have looked at length at the service manual and at the parts diagram. They show a spring connecting to the end of the governor arm, I think it connects same place as the rod...
I have a loose tilt steering column on my 425. The power steering is fine.Just have about a total of 1/2 inch side to side play. I have a downloaded service manual but little help as I haven't been able to figure out how to remove the column and the manual just says to remove all parts...
I have a Cub Cadet Gt 2542 and have tried about everything to stop the hot shut off fuel problem.Only thing I haven't done is de carbon.
I had to remove the carburetor yesterday due to trash in the fuel causing a running problem and while I had it off to clean, I checked the fuel shutoff valve...
I purchased a nice used 425 last fall to have a small loader tractor. I just recently installed a Buford Bucket mini loader that I got from Pete in Kentucky. I have nothing but praise for this setup if you have the need for such a unit.
It took between three and four months to get my loader as...