Recent content by Jack Murdock

I acquired a log splitter project that is way beyond my levels of expertise ( I was bored ). So I need it gone before the boss sees it. Someone looking to build a commercial log splitter good start with this. It sat for 8 years but has all the necessary components to complete a monster log...

I lost hold of a large round on my TW-5 and luckily when it came off the splitter it got me and not my son. Frozen hard maple

Can you send me your contact info and do you have a way to help us load it ? I am in Stephentown NY Thanks Jack

All I would need is the width and the price. Thanks jack

I have a friend that would be interested without posting pictures. Can you provide some details ? Age? size? asking price? Rear mount ? Thanks Jack

I hope this works. Looks kind of self-explanatory now with hindsight

This was my first real snow last week with my JD tractor and snow blower. We got over 30" over snow in 3 days here in 12168 ( upstate NY ) after cleaning my driveway and the neighbors I went to put the tractor in the garage but the snowblower would not go down. I removed the hoses swapped around...

I am looking for a little advice. I posted this in the JD forum as well. I have a 2302R with 9.3 GPM at the power beyond less 4 for the steering so effectively 5GPM. Is it worth putting a open center hydraulic valve to run my old Speeco 3PT lot splitter with the 4" cylinder / 2" ram with 36"...

I have a JD2302R with power beyond the hydraulic system is 9.3 GPM with 4 for the power steering and 5.3 at the power beyond. I have a Timberwolf TW5 currently but am no longer splitting a lot of firewood so I toying with selling the TW 5 and adding a 3PT splitter and valve and running it off...

I have an older Woods BMB finish mower 62" wide withe three blades looking for parts list so I can order a belt and replacement blades. Thanks in advance Jack

My 2520 crapped out last week so the dealer picked it for service and brought a 2032R as a loaner with 59" front snow blower but the 3 pt style. I like everything about this thing......I wonder if I will ever see my 2520 again.....

While moving snow Sunday the right front wheel of my 2520 came out of the axle housing with the spindle attached to the wheel. It looks like ( judging by the JD parts breakdown) like I lost or broke the snap ring internally. Has anyone done a repair like this before ? If so please advise as to...

I am looking for a technical manual for a 2520 to see if replacing this leaking seal on my mid-mount PTO is a big deal and to try and figure out what the part number is. Thanks in advance for any help you may offer Jack

well lets see if that works