Janos's latest activity

New development: I cross connected the red and blue line and I was able to pull up the stabilizer and the backhoe arm so I could park it...

Lift arm: yes the 3 point hitch, was trying to hook up the blade box. Sound is coming from under the seat where I assume the hydraulic...

When you do your first startup after something major (hydraulically speaking) its good to follow a simple procedure: 1. Crank machine a...

My backhoe and stabilizers stayed in all open position. Previously I removed the backhoe to connect a blade box and I find out my arm...

Wooow! I bet you can carve a Teddy Bear on your driveway with that setup for the Land Pride. Very nicely done. I love engineering but...

You should tap into (or break into) the line on the tractor side (I should have been clearer). On the backhoe side would technically...

This not too difficult and I have done this on my 2022 GC1723EB. You need an open center spool valve with pressure beyond port/sleeve...

Thanks @LouNY. What I described above would entail having either the backhoe or the remote(s) valve hooked up, but not both. What I...

With that setup you can add remotes fairly easily; using this as an example. Find out which of your two main lines is the pressure feed...

I like the idea of hooking up in series. The "tap into" means split the line from the backhoe somehow. Or from the pump? I'm trying to...

Thank you, I will check it out.

Thank you Lou; no I did not remove the backhoe, and yes I know about the looping requirement thanks to some YT video by a dealer showing...

I have a MF GC 2610 and I bough Land Pride blade box and a hydraulic top link. I thought there is a simple way to install to the...

Thank you, I couldn't find it. I even ask AGCO, no answer.

https://www.agcopubs.com/massey_ferguson/operator_manual/english/4283061m2/gc2400_gc2410_gc2600_gc2610_compact_tractor I don't have pdf...