Jaygyver's latest activity

My wife wanted to be 'helpful' and asked if she could use the Echo gas weed eater while I mowed. Showing her how to do it and as many...

I feel the same way about my 13-year-old son. I remember how hard I was on my dad's push mowers.

My wife has asked me/ told me she would like to cut the grass. My response was that I have neither the time or the money to fix...

We used to be a mill town and they had a couple of bearing places here and I was able to bring in my old bearings/races off of what ever...

I have pretty much the same same generator, only whatever version from 10 or 15 years ago. I've only had it on the house once or twice...

Like it's been mentioned, I'm going with the deck is out of alignment. Either the adjustment got loose or something fell off. You can...

Yeah, StaBil or the like will only extend the time, it's not a cure all. That's mainly the reason I went with the smaller tanks, in...

Yeah, if it's in the same place as on my MT235he, directly below the seat then it's a pain sometimes as my big feet will turn the knob...

I guess that's the only thing I've been lucky on then. I had no problems storing 5 gal cans of gas for a year or so, then I got nervous...

They make thicker blades, will save you headaches...... BAHHH, that's nothing!!!! Have your wife mow and ask her to pick up any...

My observational guess's? Looking at the broken bolts you can see 4 impact points, not two. The two major ones from the mower shaft but...

It looks like you have a spring loaded belt tensioner so there is no adjustment to that other than the spring breaking and nothing would...

I would bet most cutters have different requirements for the bolts. Tightened or snug. Some use them as a safety measure if the clutch...

If you have a garage floor you should be able to fit the loader and front tires on the concrete?

Had to redo the siding a few years ago on our 1800 sqft 2 story house with Hardy Plank. Living in the PNW you have to look ahead for...