For those of you who currently have grapples-
Do you use the factory remote lever to actuate the grapple cylinders? If so, is it awkward to operate?
I have seen a loader-joystick mounted solenoid that uses the curl cylinder circuit to also open/close the grapple when button on joystick is...
Hi all,
I'm sure someone here has adapted their implement plug to power trailer lights. If you have, I'm looking at the Hopkins 47425 adapter. Anyone know if the standard tractor wiring is compatible with standard trailer wiring so this would just be a plug in and go type deal?
Hi,
My 4 cyl. 2000 smokes whitish and smells like unspent fuel until it warms up, then it mostly goes away.
I thought it took an awful long time to warm up- I had it running at 1500 rpm or so for about 1/2 hour before the coolant felt even lukewarm dipping my finger in the radiator...
Hi,
Just picked up a 2000 Industrial diesel. It's the 4 cyl. Not sure of the year.
It was missing the fuel shutoff cable entirely when I got it, I can't quite figure out for sure where it would have been routed, etc. Anyone have a pic or can describe where it would attach? It would be a big...
Hi all - wondering if anyone has an M5700 4wd with LA1002 loader and quick attach.
I am specifically wondering if anyone having this combo has ever lifted a 1 ton pallet with forks. Looking at the specs, it seems that might be asking too much.
I am replacing a New Holland TT60A with 620TL...
Hi all,
Just wondering if anyone has an opinion on BKT vs. Titan Ag rears 16.9x28?
The dealer says Titans will cost $150 more per tire, that was what was on the tractor originally. The BKT's look aggressive enough, I'm wondering about treadwear.
The tractor sees dirt/mud most of the time...
Hi, I was hoping someone may know the answer to this....
I have a TT60A MFWD that was damaged in the 3 pt. area. The loader on it was not damaged- a New Holland 620TL.
I wanted to figure out what I could use that loader on if I found a good deal on a tractor without a loader.
So, if anyone...
I have just built a 28x60x14 high pole structure that I have left the entire 28' span open on both ends. I did this so I could bring full length logs in on the tractor forks to process under cover.
I would like to put some type of doors on both gable ends so I can secure the building. I will...
I think I did pretty well on it. I shopped around for quite a while and I was looking at all brands with local dealers, both private sale and dealers. This one was a private sale, I talked the guy down a little. He was looking to buy a compact tractor with a cab.
It is a bare bones utility...
Hi, I was wondering if anyone out there knows what lubricant goes in the front drive on a TT60A. My manual doesn't seem to cover the front axle specifically. The final drive is 80W-90, but they don't mention the front axle specifically. And there's only 1 quantity listed on the lubrication...
Hi all,
I took the plunge and bought a new to me TT60A w/620TL loader. It is Quick Attach style- would any/all forks fit the tractor or do I have to look for specific ones?
Hi, I have been considering the MF 2605 with DL250 loader.
Looking to lift up to 2000 lb. load with forks. Palletized loads with load center at about 18".
The specs say "lift capacity at pins- full height" is 2952 lbs.
"Lift capacity to full height at 800 mm forward of pins" is 1780 lbs...
Hi........I have a buddy with a 2002 BX1800. He just self installed a Kubota LA211 loader. Loader works fine, but 3 pt. wont work unless you simulataneously curl the bucket.
He has checked all connections, nothing looks out of place.......maybe air in the system?
Hi,
What would be a fair price for a low hour 2009 CT47 w/loader? Will this tractor hold up to some hard use? Does anyone know where I could find specs like weight and loader lift capacity? It's a L111 loader.
Hi folks,
I'm looking at wireless (cellular) trail cams for a trespassing issue at my remote property. Does anyone out there use one? If so, what brand? Do you love it or hate it?
I found a "special ops" covert scouting camera on ebay for $245.00.....does anyone have one of those?