JC2398's latest activity

Pretty good. It’s not as dangerous or “crazy” as it looks. There’s a driver in the car steering and to hit the brakes. Not much more...

is your FEL quick attach / easy on easy off ? I would figure one could remove it pretty easily even without having it running?

My very first tractor was an IH Farmall A with a Woods belly mower. Nice little and somewhat under powered unit that was always finicky...

All the safety switches are controlled by a module on right side behind seat behind a panel. They had some bad modules in that time...

Im in the same situation with my Farmall Cub. It quit on me, with a yet undiagnosed “no spark”issue, while I was plowing snow in...

Before you go that far, rethink the no-start situation. No crank?, fuel solenoid clicks?, bypass the starter solenoid and see it it...

That has been my way of doing it for years! David from jax

I would just run the winch cable under the bucket and then attach to the tractor frame as high as possible. As you start to pull the...

Work the winch cable under the bucket, then attach to the tractor, tie the loader lever back as if to raise the loader, as the cable...

Not turning over at all. I think it’s something with some of the safety startup sensors. The dashboard lights up and shows an error code...

You know it's gonna be a hassle, plus you'll have to get it off the trailer. A roll back even with the added expense would be the way to...

Not sure…It was about $100 a few years ago, but that was a guy coming out with a tilt bed trailer. Depending on how much hassle it...

My tractor won’t start and I may need to get it to the dealer next week. Fortunately it’s in a gravel parking area behind my barn. I...