Recent content by JeffreyR

If the problem is the same I would start by looking at the bypass valve which you can see in that video bolted to the top right of the case. Once the case is open its very easy to take it off and clean it so its worth doing. Mine didn't look particularly dirty but clearly there was enough to...

Just to come back at this thread some months later. One thing I didn't do in my initial testing which could have gotten me to the problem a lot sooner was trace the hydraulic fluid by very slowly undoing some bolts in the lines just enough to seep a drop or two of oil. When I did finally think...

So I had some unexpected free time today and figured I'd do some investigating since it didn't look too difficult to get access to the linkage. The case was sealed good but after a few taps I could see what I was looking for. The lever is still firmly connected to the linkage and appears to...

Hello all. I really hope someone can point me in the right direction with a problem my tractor has. I've spent my free time the last couple of days searching for likely causes to the issue but for my particular case I'm coming up empty and am just wondering where to start. I use a finishing...

Big hello to everyone here from what is an unusually warm and sunny Wales this afternoon! I bought an old Mitsubishi D1650 last year and ever since have been absorbing as much info as possible. Its a difficult task as there seems to be so little D1650 info out there. We use the tractor on our...