jgayman's latest activity

Try Craigslist or Facebook Marketplace. There are plenty of used ones for sale, probably near you. You could always go sit on one of those.

This seems to be normal with the newer machines. I have a X570 and notice the same thing. With the rod pushed in (engaged) I can easily...

It can be a little tricky to replace. There are several YouTube videos showing the procedure.

I use a Form-A-Funnel on my X500 oil filter. It tucks right under the filter and then I form the other end to go into a drain pan. They...

Most machines these days use an oil drain hose which is usually more convenient and less messy than using the old style drain tube, You...

By cold I mainly meant that it has been sitting a while in the garage and the spindles are cold. It sounds like my X500 acts just like...

The heavier 50 weight oil does not thin out as much when it gets warm or hot so less internal leakage and HST performs better. I would...

Does the Husky only have issues getting the deck started when everything is cold or is it anytime? The reason I ask is I have a similar...

Yeah, sorry... things did get a bit off track. I agree with the previous poster. Check the condition of the magnet. My gut feeling is...

Check out the CVT transmissions in the huge Case 225HP Magnum farm tractors. They use a hydraulic motor (aka hydrostatic) to power the...

That is not necessarily true. I bought a JD 175 Hydro new back in 1988. The manual stated to never change the hydrostatic oil... so I...