Hello!
Trying to rewire and replace all the missing lights on my 135 (no cab)
it looks like the head lights have a high and low beam? is this right?
also the light switch (which is a new part from MF) turns 3 clicks. what lights should come on at each click? i cant find a simple wiring...
1 MIN AFTER STARTING MY MF135 OIL STARTS PUMPING OUT OF THE BRASS SWITCH NEXT TO THE SEAT? IT'S IN THE OFF POSSITION (I HAVE TRIED IT IN THE ON POSSITION AND IT FLOWS OUT EVEN MORE)
IT WASN'T DOING THIS BEFORE I RESTORED THE TRACTOR SO WHAT HAVE I DONE WRONG?
THANKS
JINGLE.
i have 2 mf 135's.
i'm restoring my 1970 mf 135 first but it was missing its battery lid so i've taken the battery lid from my 1966 mf 135!
however this doesnt work. the 1966 battery lid hinge is secured to the bonnet with 4 screws. i dont have any screw holes in the bonnet for my 1970 mf...
can anyone help me please.
is there a wiring loom availible for all the lights on a massey 135 like there is a wiring loom for the engine?
ie a wiring loom that connects from the back of the dash board light switch that controls the headlights, side lights , rear lights and plough light?
many...
im getting my MF135 sandblasted tomorrow now that its all stripped down. i just want to check a few things.
1) After sandblasting do i need to wipe the metal skid down with anything. a cloth with chemicals?? or do i just air hose all the sand off and start with priming.
2) im using zinc...
i drained the oil on my MF135 as I've put a Trumpet Housing Gasket on the rear half shaft. i need to fill with oil but i cant find where to fill or how much to put in? help is needed as i cant make head or tail out of the workshop manual. thanks.