Recent content by jodebg

Have a lot of wood to cut up and thinking of buying a log lifter in hopes that it will make cutting a bit easier and faster. Let me know if you have used one and if you advise buying one. And, who makes a good quality lifter. Thanks

We will be cutting down over 30 large trees on our property. I have a Kubota B2650 with a quick attach bucket. I also have a set of Bradco pallet forks. What would be a good tractor attachment to work with to lift, haul and place the logs in long lengths onto a pile , and also help us to haul...

Need to do an oil change on my B2650. There are 2 threaded caps on the top of the engine that have "oil" embossed on them. Are they both used for refilling the engine oil? Any advantage to using one or the other?

I purchased this Kubota Quick Coupler (Model BL1767) for my Kubota B7800 with an LA402 FEL. Can someone help me to identify what Kubota Tractor Models and what Kubota FEL Numbers this will attach to? Appreciate the help!

Thinking of making a weed drag and hoping someone has done so and can share some ideas and experiences. I've seen instructions online for making one out of a pallet and using screws to dig into the sand road to sever the weeds. Thanks

Just purchased a grab link and want to mount it to the end of a 5/16" chain. Grab Link - Imported - L2i Obviously the grab link is made for a 3/8" chain, but from what I am told it will work with 5/16" chain as well. Would like to be able to remove it easily to be able to install it onto...

Looking for the photos posted by a forum member of a piece of angle iron welded to the center of a bucket with 5 verticle slots for securing a chain. Hoping someone knows how to access them. Thanks

My prior tractor was a B7800 with the 3ph quarter inching valve. When I shut the tractor off and moved the fel control lever around to eliminate hydr pressure, both the fel and 3ph responded. With the B2650, it seems like only the fel system pressure is relieved. Am I doing something wrong...

Checking to see if anyone has come up with a way to reduce side view mirror vibration?

Wonder if anyone can tell me the best way to change the engine oil on an MTD wood splitter with a B&S Quantum XE 6 hp engine. There's a plug on the bottom, but using this makes one heck of a mess. Any better way to drain the oil?

Got to test out the ballast box feet and dolly yesterday, and all went well. The PT pieces allow the ballast box to be removed without a pallet, and the dolly fits great for an easy roll away. The champhers on the sides of the feet helped to put the dolly in the correct position when the box...

Found this on the roadside. May be able to use it in an upcoming project. Wonder if anyone know what it was used for? It's about three feet in diameter.

My Kubota B2650 came with a Kubota ballast box. Getting ready to do some loader work and need to fill it. Thinking of filling it with 1/2" stone from a pile that I have. For removeable fill materia,l is the 1/2" stone a good option? Any idea as to the combined weight of this B series box filled?

Getting my B2650 work ready and have a question. On my B7800 I have an anchor hook welded to the center of the bucket. We do a lot of landscaping with sizeable stones and have used to center hook for lifting and placing stones around our property. The weight in the center has bent the top of...

Recently purchased a Kubota B2650. Being that I have a carry-all attached to the 3ph, I am forced to keep the rops in the horizontal position-something I am not accustomed to. On my B7800 I am able to run all 3ph attachments with the rops fully lowered and had my tool box mounted on the...