JoelD's latest activity

  • JoelD
    JoelD replied to the thread Dealer no longer.
    Tough to be loyal when dealers seem to randomly come and go. With my cars I buy where I can get best price and get serviced locally...
  • JoelD
    JoelD replied to the thread New Owner of a Kioti LB2204.
    Very nicely done you should be happy and very proud of yourself!! Time to do the “I fixed it dance”. Invaluable experience for sure. I...
  • JoelD
    JoelD replied to the thread 2375 backhoe Leaky Control Valves.
    For my nimco the sizes were a bit odd and took me a while to find the right size and compound and durometer.
  • JoelD
    JoelD replied to the thread 2002 DK50c Shudder?.
    Right guess is the three point bouncing I hear about not sure which machines though?
  • JoelD
    JoelD replied to the thread 2375 backhoe Leaky Control Valves.
    Backhoe Control Valve https://www.tractorbynet.com/forums/index.php?threads/Backhoe-Control-Valve.405581/
  • JoelD
    JoelD replied to the thread 2375 backhoe Leaky Control Valves.
    Search for the word Nimco and you’ll find the post
  • JoelD
    JoelD replied to the thread 2375 backhoe Leaky Control Valves.
    I’ve replaced every seal in my spool valves more than once in my backhoe. Search and you’ll find threads on the topic. Don’t use factory...
  • JoelD
    JoelD reacted to RandR10's post in the thread New Owner of a Kioti LB2204 with Good Post Good Post.
    I have an update for everyone on this. I attempted to bore the original sleeve on that broken piston's cylinder and the scoring was too...
  • JoelD
    Bad connection on negative cable to frame will do same thing. Put voltmeter on, turn key, voltage dropped to nothing. In my case...
  • JoelD
    Remove the ground cable from frame. Use sand paper and clean up the frame and cable to be sure you have clean connection between frame...
  • JoelD
    Nicely done. I can’t dig two feet without hitting 10 of those. That is some awesome looking soil!!
  • JoelD
    JoelD replied to the thread Tires do not spin.
    Odd it will stall with brakes and not under load with no tire spin. Rims spinning in tire sounds like it would explain it. Any other...
  • JoelD
    Good luck with the machine. 30 seconds sounds like fuel delivery to me. Right to make dealer’s problem not yours
  • JoelD
    JoelD replied to the thread Oversized cylinders on my ck2510.
    With regards to flow and pressure, pressure can also be limited by motor, in other words if lucky, motor stalls prior to failure. In...
  • JoelD
    JoelD replied to the thread Buying Advice Kioti LK3054.
    My LK3054XS is frame mount and I really like the design and super strong And tight to the machine. Level ground helpful as stated I...
 
Top