Help. I started my jimmia 254 shifted into gear and later tried to shift into reverse. Pushed down on the clutch peddle and it stayed in gear. Killed the tractor. Now I find that the clutch seems to be welded to the flywheel. You can shift gears and start the tractor in gear but the clutch does...
I started my little iseki and found the clutch would not work. When the peddle is depressed the tractor keeps on going. You can shift gears with the engine off and can then start the tractor in gear. You can also shift gears in "low range" but it kind-of grins the gears.
Help, my Jinma 254 tractor blows the fuse when I try to start it. I have replaced both the switch on the clutch and the ignition switch. When I turn the key I sometimes get the starter to run and have started the tractor but then find the fuse is blown when I go to start it the next time. Other...
Help, I have an older (2000?) Caroni model fl 1400 tiller. The top gear-pto attachment box has a fill hole on top and a drain hole on the front bottom. Dip stick has two marks near bottom. I assume the bottom mark is the lower operation ( need to add fluid ) and the top mark is the full line...