Recent content by JohnAnemone

Hi All, thanks for the feedback. My fuel pump was bad - replaced. I thought the leak was from the fuel shutoff, so I replaced the O ring - but the issue was actually a broken fuel bowl. A replacement is on order.

@gstrom99 Appreciate your help. I have 2 tanks connected with rubber hose. there is a "T" in the hose for the line that runs up to the lift / feeder pump. I pulled each line from their tanks and fuel flowed straight out. I then connected a hand siphon pump to the line at the lift pump and one...

@gstrom99 thanks. I pulled the white plug and no fuel. I also pulled the fuel line and turned the engine over to see if I got any fuel and nothing. Next stop is fuel lift pump? Also, the white plug, I believe the hole was facing down, but I'm not positive. Do you know if down is correct...

I know this is an old post, but I'm hoping you see this. When you had the leak, did it cause any performance issues with your tractor? I have a leak, and no power.

Hi, I have a Branson 3820. I was brush cutting today and suddenly it started losing power and shut off. I was able to get it running, but zero power, even fuel pedal fully depressed - nothing. I did notice that the engine begins to rev up, but immediately drops back to a rough idle. I noticed...

$175 in my truck the other (thats when the pump shut off) and I still didn't fill it up. Yeah it hurt.

Hi Mike, Don't know how much help this will be, but according to the manual I have (it covers 2910, 3510, 3820 (this is what I have), 4220 and 4720. The work unit cannot be lifted (this is referring to the rear unit - not the front end loader, but they are working off of the same system) The...