Recent content by JohnInCA

Anyone buy a TZ series lately? Would you mind posting what you had to pay, and where you are located? I need all the help I can get, as there is only one dealer within 300 miles, and I'd like to know if I'm getting ripped... Thanks John

I'm considering buying a TZ22DA or a TZ25DA. According to NH's website, there is 0% for 36 months, or cash back, thru June 30. Does anyone know how much the cash back rebate is if you decline the financing? Thanks John

Anyone have a Bradco 408 backhoe mounted on a NH TC25/29/33? I have 1/2 of the subframe kit installed, and it appears that the lower 3pt arms will clear the ground by only 3" when the hoe is mounted. If anyone has experience with this tractor/backhoe combination, I would appreciate comments on...

For those of you considering a backhoe, here's something of interest. I have purchased a Bradco 408 backhoe and subframe mounting kit for a NH TC29D. I'm going to be posting pictures of the installation process as it progresses. First, a few comments about the subframe kit. It is designed so...

I'm installing a Bradco 408 on my TC29D. It does not have a PTO pump. I'm wondering if it's ok to hook it to one of my rear remotes, and run it by holding the remote valve open with a bungee. Any problems with doing this? Seems like a simple solution to avoid plumbing more lines from the...

Ok, I recently installed remote hydraulics on my TC29D, and thought I would post some pictures for those of you contemplating the same. It turned out to be a very simple process, requiring about three hours total. I decided to purchase the "factory" kits from NH, as I wanted the controls...

I noticed on the local dealers lot, that the TC40D and TC45Ds didn't have tail lights, just reflector tape. Is this something new, or was it always that way?

Ok, I'm about to purchase a backhoe. The local dealer has a BushHog 768H with pump and subframe for $6700. Good price? Also, I would greatly appreciate any comments regarding BushHog quality, as well as any tips on which brand is easiest to mount/dismount, and requires the least amount of 3...