jpilk99's latest activity

I am looking at the Owners Manual from the Husqvarna website and they show the belt off to the right of the steering column (see below)...

I'm working on a neighbors machine and the drive belt snapped. He's not to handy, so I said I'd help. I looked up the "parts diagram"...

I guess that you are still in plenty of time to get the mower a going if you are dealing w/ snow! It sounds like you must have the...

It was the starter solenoid. Loose connection(s) and not the cleanest. Problem solved - running great. Thanks all!!!!

Thanks Gem. Yes, I have made sure - I can hear the electric clutch engage and disengage. The more I dig in, I think it's start...

One more thing to check, be sure the blade engagement knob is FULLY down (off), otherwise you get the same symptoms. I've had occasions...

Sorry I have not been back to close the loop on this. The Kohler was indeed seized. I've been hard at work having secured a donor...

Thanks as always Tom!!! I did go out after dinner tonight and found two of the connections to the solenoid were not tight, or as tight...

I would start my diagnosing at the solenoid. You should have a 4 post solenoid. The two terminals which are smaller, one will need to...

I recently acquired an otherwise Nice 2013 ZRT 50 with 300 hours, model number 17AFCACP056, but the previous owner ran it without oil...

From memory, RH side doesn't get a cover. Far enough under the machine that the foot rest provides shielding.

Ahhh. I just know when I look at machines that people get at Lowes or Home Depot, that are painted green & yellow and say John Deere...

@jpilk99 The MTD is nothing new with Cub Cadet since they have owned them since 1981, Which is now owned by Stanley Black and Decker

Not that I see, but am always on the lookout. Thank you

Any signs of mice chewing on wires?