Recent content by jpsaf8geusa

I have a Branson 2800h with the 00 loader with the single add-a-grapple that I got through Tractor Mike (Single Add-A-Grapple for Sale - Ask Tractor Mike-Ozark, MO). I use it all the time. I wanted a full grapple but I can't get a quick attach for the 00 loader. I was afraid that the bucket...

Under periodic maintenance at 300 and 600 hours is the statement "Engine Crankcase Cleaning". Can anyone help me with what that means? Thanks John.

Update: The front hyd leak was definitely the front hub seals. Replaced and all good. The RTV is holding good on the supply line so far. No spots under tractor!!! Good day. Then there was the starter. The starter started hanging as I was finishing up the 600 hour maintenance. Argh! $546.00 for...

While I was at the local dealer ordering a part I asked the parts guy if he could get the step that is on the new 2400s. He could and I did. If you are approaching my age and girth you might want to invest in one. I am enclosing picture of the backing plate I made to distribute the weight. I...

K5lwq, Here is a picture from the parts breakdown. It at the left end of pipe (11) right around the flange. The loosened bolt (10) and I can wiggle the pipe. I plan on lightly prying on the flange and putting RTV at the connection. I will let it seal for awhile and then try it out. If it still...

2013 2800H with 600 hours, Add-a-Grapple. First off, I really like this tractor. It has done everything I asked it to do. Only complaint has been the front wheel seals. The right front seal was repaired once under warranty and twice by me. Now the left front is leaking. Since I put the grapple...

Hello everyone, I am about to install a third function valve and really thought I had a handle on it. I have the found in the following pdf. http://www.ansungusa.com/pdf/PartsManuals/FELK-MX2150QB-OldModel.pdf Enclosures are: 1) Picture of device on side of tractor engine 2) Picture of Besko...

Hello, I have a Miller 140 and have loved it until had to do some welding on my bucket and had to load some flux wire and still had some trouble getting a good weld. I am a relative noob to welding, but I am learning. Will the Harbor Freight 220v MIG make me happy welding 1/4"? Thanks John.

Well this my first post on the site. I have a bl00 loader on my Branson 2800h. I need the functionality of the bl100s. Can anyone tell me the price of the bl100s shipped to North West Washington State? John.