i broke a set of belts last year and already broke a belt this year, i admit i'm cutting 2-3 foot high grass, know of any replacement option for these small belts, expensive at about $75 a piece thanks
i've had 90 inch deck for toolcat for 2 years now, last year it broke off from plate holding it to toolcat while tramming at slow speed, also wheel shaft bent on deck and belt broke while mowing 2-3 foot weeds. this year i've bent another wheel shaft and broke another belt. any suggestions for...
my tc's 90 inch deck does fine when i have time to keep field below 3 feet, but this wet summer and my lack of time, i now have acres 6-7 feet tall in weeds. unless i go very slow the deck skips over a lot, what deck do i need and hopefully cheaper than 90 inch deck at 5,000 might work in this...
my story; tc is 75 miles from dealer, bolt holding bobtach to mowing deck broke or came out, deck dropped to ground-no deck damage. dealer sent man out said under warranty no problem, repair guy goes back and orders parts, sinice he's coming back anyway i ask dealer to have him replace to hose...
just paid $3550 for i1050, when delivered , found out it's an 07 model, know of any differences in 07 verses 09 in design and also suggested money difference thanks
i1050 cub cadet question
model # i1050 or ztt50, i just bought one $3550, thought i was getting 09, when delivered was stamped 07 model, know of any difference in 07 and 09 models , and also what refund do you think i should get or should I just make them give me a 09?
i,m a new tc owner, before i started to mow i noticed there was no filter over hydraulic oil cooler, so i took one from home to cover it just in case, after 3-4 hours the filter was covered in dirt, bobcat dealer said could use filter or just hose it off when needed, what do you folks do, thanks
i mowed yesterday for the first time with my tc and 90 inch deck, mowing a lot in sandy damp soil, got stuck 5 times in about 5 hours, soil wasn't soaked just damp. any suggestions thanks, tc has standard tires (not turf) , mowing 6 to 12 inch grass, cutting height high as deck will go
getting my toolcat this week, my farm is 5 miles blacktop-country road and 10 miles narrow gravel road from home, at top speed 18miles per hour little slow, so i guess trailer is my answer, i need trailer just strong enough and wide enough for toolcat, i'll leave attachments at one place or...
i just bought 07 ( 150 hours) toolcat today, finally, i'm gettin 90 inch mowing deck , 72 inch tiller, i think i would like grapple bucket to move small fallen trees, trees limbs, carry camp fire wood etc. also will use to do little road work, not going to do serious logging, what do you all...
any one have pros or cons concerning 62 or 76 inch tiller use, looks like a good option to not only prepare garden but to level rough areas in fields using tc thanks
i'm ordering 3720 monday, what options do you folks recommend, this will be my 1st tractor, plan on getting 6 to 8 foot rough cut deck since use will be 95% mowing 30 acres of flat fields, might do little garden with pto tiller, can not decide to get cab with heat and air, or decide on loader, i...
i,m looking at cubcadet 32 hp with hydrostatic trans and loader 17,900, what model case would be similar, also would like model # of little larger case, but also having hydrostatic drive thanks