Recent content by kartingdad

Been having to do a lot of driving on the road and have been using my hazard lights for safety reason, but sometimes they work and sometimes they don't. I checked the fuse and the switch and they are both ok. Is there a flasher unit like a car has to make a blinker work? Where is it located...

Getting ready to do 6 acres of brush hogging and I know that there are some ruts in this field so I want to remove my loader from my 2004 TC40DA tractor, but when I look at the old post I can't pull up the pictures that were posted as to how to do this. You Would think there would be a you tube...

Trying to fix a mower for a friend, it is a Simplicity with a 60 inch deck, made somewhere in the 1990's . seams to run ok, but at full throttle it tops out at around 3200 rpm's, and when I throw the deck on it drops to 2700 and that is all she will do, start to move and it drops more (maybe...

Just found this part on the floor by my right heal, it is 20.50 MM in Diameter (Approx .800 of a inch) and is a soft rubber like it would be a plug of some kind. I don't see any holes anyplace that it would of fallen out of. Any suggestions Thanks Don

Time for service on my TC40DA . Will pick up the HST filter (SBA340501030 ? ) from my dealer and I have a WIX 51536 Hydro filter, but my local NAPA dealer is tying to sell me there brand of Hyd oil for $50 a 5 gallon bucket instead of $80 a bucket at my NH dealer. The NAPA oil says it meets the...

My 2004 tractor gauge will only read 3/4 full when fuel is coming out the filler cap (Which is better than reading 1/4 full when out) . Wonder if it's the sending unit or the dash gauge? Has any one ever had the unit out of the tank and what does it look like? Thanks Don

Ok, this didn't happen without trials a tribulation, took 3 tries and it not saying that it's the only way to do it. Try 1 Bought stove and thought that I could out think physics. I moved the fan from the cool bottom and placed it next to the top and put the duct work on the bottom to run it...

Ok, every time I grease my 2004 tractor, I grab my manual to make sure I don't miss any zerts, but I have yet to find several in the book , like number 9- stabilizer rear ball joint, 12- rear drive shaft and 13- front drive shaft. I think I have found 6 on the front end and pivot point and 3...

HI GUYS hope some one can help, I was pulling logs there a bushy area today and I noticed that i couldn't shift from low to high range, then see the battery (ALT) light on the dash came on and when I set the parking brake the tach quit working, when I released the brake, tach came back on. I...

Ok, just got done changing the fuel filter in my TC40DA, the top O ring was missing so I had to go parts store running to try to find one that fits, got it all in and before I tightened the bowl ring I turned the fuel on and filled it up most of the way, after tightening it I turned the fuel on...

went to my local dealer today and was able to catch the last mech. before they closed, my cruise wont come on, Green light will light up , but won't stay on, he said first check the brake switch and see if that is disengaged, when I crawled under the tractor, I think the lever is on the wrong...

Looking at a New Holland TC40DA. Tractor has always been stored inside.FEL but is not a SS quick attach. &@" bucket, looks like it has never held a grain of sand. No rear remote. Well my deal is starting to maybe fall apart, The tractor is being sold by the owners brother in law, owner moved...

Hi guys, new to this page, just closed a deal on buying a 2006 TC40 DA with a loader and 419 hours, always been stored inside and it shows (look like it was just off the show room floor). My question is it does not have a rear remote, and I am getting a box blade with it that I would like to be...