Recent content by Kenneth S

I have a old Agri-Cutter 8' rotary mower, and I am looking for some replacement flexible couplers that go between the gear boxes. Does anyone have a part number, or know of what other brand of coupler would fit.

I have a Hesston 560 round baler that makes good bales, but I'm having problems with either the monitor, or auto sequence box. Does anyone know of someplace in the U.S. that can test, and or repair them. It just started acting up right at the end of hay season so I want to see if I can get it...

If you are in North American you can login to AGCO online parts as a guest user, then enter the model number on the next page, and search AGCO Parts Books

The two lower pedals are the rear brakes (left side, and right side), the little pedal up high is a foot throttle. Now I can add the 35 utility and turf numbers to my" yellow" tractor folder. For a differential lock there would be pedal on the right hand side kind of underneath the controls for...

Lights were optional. My brothers 135 didn't have any lights so he went with the UK style lights since his needed a new grill anyways.

I painted mine the same as my brothers 1972 135 (and his 1965 150 is painted the same way). From the front to rear flint grey metallic, red sheet metal, and wheel centers, sliver mist metallic on the grill/side panels, and the outer wheels. I didn't use MF paint so it's not exact.

My brother has one just like yours, its a 1965 150 with the 3 cylinder Perkins, has everything except ipto, just has lpto. I doubt you will find a complete new wiring harness for it, but the wiring isn't too big of a deal do yourself (its not as complex as you may think). The switches, and other...

This is how I would do it ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here's my tractor with just the lower lift links hooked to the shredder. I use the upper link to hold a bucket with some tools in it, until I put a tool box somewhere on the tractor.

Looking good, its well worth the effort. My rescued 1965 MF2135 industrial (I just couldn't stand yellow paint).

I painted my 2135 with Rustoleum using acrylic enamel gloss hardener, and thinning it with acrylic enamel reducer. I use the tractor to shred pastures letting mesquite branches rub against my brush cab, and it barely if at all gets scratched. It sits in a shed with no walls so it still gets...

SSQA measurements

On my 2135 Industrial (basically a 135) the plate was on the left hand side below the battery.

This one is for a 135 diesel with a one wire alternator. This one is for 135 diesel with a generator.

You can remove the lift cylinder/piston assembly a little easier by removing the 4 nuts on the top side of the lift cover as indicated by the 4 red lines in the picture.

Block the front wheels so it can't roll, jack up the rear end until the tires are just off the ground, and block it up. Un-hook the rods going the brake levers, turn the tire while tightening the adjusting nut until you feel brake just start to drag. Put the rods back on, and adjust them so both...