KennyG's latest activity

  • KennyG
    KennyG replied to the thread New tractor owner.
    There's no heater but you pick up engine/transmission heat and there's no wind. You can't work in a T shirt but when it's zero F...
  • KennyG
    KennyG replied to the thread New tractor owner.
    I've had an OTC soft cab for almost 10 years. Not any real need for defrost or wiper. With the optional glass windshield you can add a...
  • KennyG
    KennyG replied to the thread New tractor owner.
    The OTC soft cab is a great buy for winter use. Depending on the amount of snow removal, look into a front blade (snow plow) or a snow...
  • KennyG
    KennyG replied to the thread I don't understand something..
    I put about 100 hours a year on my tractor. I've considered picking up a zero turn mower. That would probably drop the tractor usage to...
  • KennyG
    KennyG replied to the thread Paint.
    With good surface prep, spray or brush application is equally good. Brush is actually easier on some equipment because of the shape...
  • KennyG
    KennyG replied to the thread Newbie to haying.
    I can't remember which US company came out with the small round balers about 50 years ago, but there was one purchased in our area. We...
  • KennyG
    KennyG replied to the thread Newbie to haying.
    Point one - You don't need a conditioner. Years ago, we cut clover and alfalfa with a sickle mower and just let it dry on the ground...
  • KennyG
    Check the prices on quality (Bell or Shoei) motorcycle helmets.
  • KennyG
    There have been cases of clear coat failure due to improper application. Clear coat is supposed to be applied shortly after the color...
  • KennyG
    KennyG replied to the thread Help with roundup mixing..
    How soon do you expect it to work? I mix mine only slightly stronger than recommended and get good results, but it takes a few weeks. I...
  • KennyG
    KennyG reacted to Moxie 15's post in the thread What they said isn't what you heard with Good Post Good Post.
    My wife is always mad at me for not hearing her. Finally a few years ago she made me get a comprehensive hearing test, When the doctor...
  • KennyG
    I hope that's to the bottom of the deck and not the blades. If that is the blade height and your grass isn't a creeper, you're scalping...
  • KennyG
    KennyG replied to the thread New Oregon Gator Blades.
    The leading (cutting) edge is a normal blade and can be sharpened like any other. The mulching fins (the trailing edge) don't get...
  • KennyG
    Taking off the deflector will help some. I do that but only when I know no one will be within 100 feet of the mower discharge. Mulching...
  • KennyG
    If you are expecting to buy anything and find cheap OEM parts, good luck. That's just not the world we live in today. I think any diesel...
 
Top