Recent content by Kerton

Hydraulic Relief Valve Adjustment for Bx2670 or similar Well, I put my shims in. I tested out to 1725 lbs stock with 45 hours on my BX2670. There were no shims out of the factory. I put in one 0.4mm shim and tested out to 1925 lbs. I'm gonna leave it there for the extra kick, for what its...

The shims arrived from Messicks, USPS First Class mail. Order 5/25 arrived 5/29. Pretty good shipping, of course they're tiny, and it was "mystery shipping" until it arrived. USPS First Class is supposed to be trackable and 3 days, but you don't get a tracking #. And my calculations at the USPS...

I have the BXpanded forks, and just got the Piranha tooth bar. As many of you know, the tooth bar has cut-outs (teeth missing) on the far left and far right where you can still use the forks when the teeth are installed. However this limits the forks' location. I want to retain the ability to...

Well, I've improved on the setup I described in this thread. The forks on the back sat flush with the QH, and that meant the QH lower hooks were sticking into my pallet load. So I added a wood spacer. This provides the right spacing, but also prevents the metal on metal rubbing. The forklift...

I have a BX2670 that Kubota took to a bunch of trade shows and fairs as a demo. It's a 2013, and it had 8 hours when I bought it, but it had already been around the block. Kubota had a bunch of accessories and implements attached to it, because some of the stuff isn't stock. For example, I have...

I used to have a Titan 2" square hitch receiver in my 3 point hitch most of the time for moving trailers and such. It's pretty handy and multi-purpose, since I welded on a "Hitchin Post" with a lawn trailer hitch eye, a set of hooks, and a 2" ball receiver (see triangle shape hitch photo). On...

I love my new lever location. OK, here are the photos I promised. It turns out I DO have before photos, since I took all-round pictures of my Kubota when I brought it home. I just took photos from the same angles today to match up. The best ones to see the difference are the "from top" ones...