Recent content by Kilo69

So I wasn't sure if the little guy could do it. But as the pictures show it can. Approximately 700lbs did it even without counterweight although if I was doing more than two I would so I could move safer. And all this even with a dead display unit computer!

I'm having a starting issue with my 2009 CK35 HST. I have it narrowed down to the 30A power relay not having any ground plane. If I manually ground it back to the battery the relay activates and the IP solenoid clicks over and tractor runs fine until shut off. Anyone know where that wire ends...

So I have been having an intermittent issue with glow plugs and starting this winter. It is now becoming the normal unfortunately. What is happening is when I turn the key the glow plug relay is not always energized. No glow plug light on dash either. Manual glow plug position makes a light...

So I stopped by the kioti dealer to grab some maintenance supplies for my CK. Mentioned I'd be looking at upgrading to a DK50 HST. He said the DK's are on the way out and these NX's are the replacement. Had a look and they seem pretty decent except for one thing. The fuel tank is now mounted...

Found this out back on the acreage. No clue what it is, but looks pretty cool one end looks like a keyed shaft. I was thinking maybe some type of tiller or stump grinder?

tried to snap a vid of my CK35 HST pulling an old two furrow cockshut plow I picked up for $200 (plow and 2 spring tooth harrows). This is only my second time plowing, I think I'm getting it setup ok both furrows seem to be going fairly evenly on depth. I apologize for the shaking video it's...

So, Looking at upsizing to a DK50 HST, mainly to get the next step up FEL as it's rated at 2700lbs vs 1100lbs my current CK35 has. ALso the 50hp makes running a baler and discs a better option since I want to start haying my own fields. So here's the details on the current beast 2009 with...

So the CK35 HST has been opening my eyes to what a tractor does. Most things I do revolve around can I use the tractor to do it haha. Lately however I've begun to wonder if I could do more with a few more HP. Especially in the way of haying. Right now I do not hay my fields so to speak but...

I'm wondering what all is involved in adding remote lines to my CK35. From what I can tell it doesn't seem that hard to add a couple lines with quick connects and run them to the rear of the tractor. Is there any tricks or things I should know before I get into this? Thanks

So it the extra cost worth it to get two fingers on the grapple bucket? Where does it come in handy?

Plowed an acre with my CK35 and a dual 12" bottom plow last weekend. here's a clip of how it looked Any pointers? To me it seemed the second moldboard wasn't going as deep as the first that is closer to the tractor? would lengthening the top link get both of them running the same depth...

Ok so I had a thought... which I felt you guys would be the best judge on if this idea has any merit or not. I love my box blade, but sometimes wish it was out front of the tractor. So I thought why couldn't I weld up a quick-attach bracket for my FEL to mount it? I'm trying to decide if this...

So I'm seriously looking for a box blade for my CK35 kioti. I've talked to the local kioti dealer and he has two box scrapers in stock. The first is a 6ft kioti brand and the other is a 6ft walco heavy duty brand. Kioti is $1295 Walco $699 Kioti seems to have radius moldboards and clevis...

So I'm looking to pick up a rear mount blower. I found a good deal on a 7ft rear mount but I'm pretty sure that's too big for the CK35 HST???? But I've heard the HST might save me as I could run it slower than a geared tractor should the snow really pile up and start bogging down the tractor...

Been looking at smaller used plows as I'd like to plow about 10 acres around the house to start messing around with some crops. Would the CK35 HST like a single or double furrow? I'm worried it might not have the weight to pull a double but maybe you guys have experience I don't. Fields...