leonz's latest activity

  • L
    leonz replied to the thread Is 25hp enough?.
    You should hold on to the L2650 as the new mules have the pollution control crap that you do not want or need. You should also keep...
  • L
    leonz replied to the thread Flail Size for a Kubota MX5000?.
    For your mule you should choose the Hiniker model 5700 6-foot flail shredder for your use. If the tow bar is adjustable to the far...
    • hiniker flail shredder cup knives.jpg
    • hiniker flail shredder CV joint PTO shaft.jpg
    • Image7-5710-flail-mower.png
  • L
    Hello Sid Post, He is mowing too low. If the mower/shredder is going to be dealing with that kind of abuse the either of the...
    • Image7-5710-flail-mower.png
  • L
    leonz replied to the thread caroni belt replacement.
    I thought this was posted but apparently it was not; Both V belts must be from the same lot number. If both V belts are not from the...
  • L
    leonz replied to the thread caroni belt replacement.
    Both sides should tighten equally using the adjusting bolt that is attached to the plate the gearbox is bolted to as the pulley mounted...
  • L
    Hello and good afternoon Axelman, I want to welcome you as the newest resident member of the "Flail Mower Nations" from the Great State...
  • L
    leonz reacted to Axleman27's post in the thread Flail Mower Let's talk flail mowers with Good Post Good Post.
    New tractor owner and first time poster here. After reading a lot of this thread and some others, I settled on a flail mower instead...
  • L
    You have a taper lock bushing there. if it is not removed in the correct sequence, it will be damaged. At the same time the shaft will...
  • L
    leonz replied to the thread Water.
    If we ever get to the point where we start using small thorium salt reactors for power we will be able to distill as much or more sea...
  • L
    He deserves a full refund as all he has now is scrap metal. He is protected by the state consumer protection laws in his state. He...
  • L
    Hello rehashed welcome to the forum, Please do not worry, I just found your post and I am sure we can help you with this. A properly...
  • L
    This SKF bearing bible is an excellent guide for maintenance of bearings and determining why a bearing failed. It is too large to upload...
  • L
    I have used and owned flail mowers for over four decades andI am not sure that makes me an expert about them. My father had a Ford...
  • L
    Before Kubota bought out Landpride, the Land Pride Company was importing the Maschio Brand of flail mowers that were painted in Land...
  • L
    leonz replied to the thread limb ninja vs offset flail.
    Edit to add this today 7/17/22 If you think you can make better use of a limb ninja you need to ask the dealer for a list of buyers so...
 
Top