LMychajluk's latest activity

I stalled once with the pivot pins removed. It is not fool proof. But I work slower now and have not had it happen again.

Did you pull the 2 pivot lock pins? I've only done a few myself, but it seems to me the pivot kind of controls the size of the bite. If...

One thing to keep in mind w/ it is that when you release the knob, the system will drive the truck to follow the trailer. So, you can...

You're not alone the PTO run feature on the newer Workmasters can be a little confusing at first. On your 2023 Workmaster 75, that...

I wasn't familiar with using 'limit chains', but after a bit of Googling, I kind of get the idea, but am wondering how they may work on...

I'm not too familiar with tractors other than my own, but I thought it seemed to have a good number of adjustments, incl. the side to...

The lower links do 'extend', though I only extend them when hooking up. Once connected, I push back a bit w/ the tractor and they lock...

The left and right lower links are level with each other.

I'll give that a try. I've been trying to set it so that w/ the 3pt all the way down (rollers on the ground) , it's running high along...

In my 'test run', I was mowing the brush alongside a trail under the power lines in the back of the property. The power company had come...

Thx. I'll move the top link back to the slot, but I may need a longer top-link to keep it tilted back for a minimum cutting height. I...

Speaking of Ditch Bank Mowers, what's the common setup when using it in the typical mower mode (level and directly behind the tractor)...

Yes, you can. Not sure if the process is consistent across states(?). W/ a trailer, in the NE, it's my understanding you need to order...