Recent content by LONGEVITYsimon

Hi Everyone, As some of you may know, our contract with Tim Robel ended - he did a great job, and we have since partnered with a professional that has lots of experience in the welding world. Scott Miner will tell you all about what is ahead. His resume is top noteworthy, and we are proud to...

Hi Everyone. Happy 2013 and what better way than to do a customer appreciation in January. One guy/gal will be able to save 40% on our welding/cutting equipment exclusively to Tractor Members. What is this all about? We are giving 40% off to the first customer on Tractor By Net with 50 or more...

Check out our new stickweld 200. It is priced at $349.99 and should make a great addition to those who are looking for a stick welder with a 60% duty cycle at 200amps. Operates on 220v 1phase. stickweld-200

Check it out! A nice start to a series of videos.

Hi Everyone, We are excited to introduce our latest DC TIG welder, the TIGWELD 200i which has PFC allowing it to work from 90 volts to 280 volts and comes with a 110v/220v power plug adapter. Rated at 200 amps, there is plenty of power for your non aluminum welding. Some advantages of the...

LONGEVITY TIGWELD 200i - 110v 220v 200 AMP DC TIG/STICK WELDER Hi Everyone, We are excited to introduce our latest DC TIG welder, the TIGWELD 200i which has PFC allowing it to work from 90 volts to 280 volts and comes with a 110v/220v power plug adapter. Rated at 200 amps, there is plenty of...

Hi Dan, I had one of our welders David, weld with a Lincoln's standard fleet weld rods and he stated the machine is capable of doing it just dialing it in is the most important part. I took some photos of the weld, which he says he is not proud of, but something that will show it works and is...

Hi Everyone, I am proud to introduce the PROMTS 200, which is a 3-in-1 welder, which is capable of welding in MIG-TIG-STICK modes! This unit will rival the Fabricator 181i and the 211i. It has a power output of 200amps on both MIG and TIG modes as well 170amps on the STICK side. The TIG welding...

Hi Jim, I was able to get some more data for your request. We are working on the cut speeds on the torchmate table to get an accurate result. The duty cycle is at 40 degrees Celsius 10 minutes at 40%. Same on 110v. Above is the chart with 110v on the left side and 220v on the right side...

Hi Everyone, I am very excited to introduce our TIGWELD 200 EX, which is the best AC DC TIG/STICK welder we have ever offered. It comes with AC and DC pulse controls, hot start and anti-stick for stick, and basically the best arc you will see from a TIG machine that is produced by LONGEVITY...