Recent content by magnatic

I tried to install the MMM on my BX2350 and found that I had to remove the lock nut on the mower link adjusting bolt to be able to thread the bolt in far enough to raise the deck enough to be able to lock the hydraulic control knob in the highest setting. I guess I could buy a thinner lock nut...

I'm planning to order these lights and I would like to hear from those who have used them as to if there is a noticeable difference in performance between the 4 3/4" and 6" lights, and if the 3 light kit would be necessary/superior to the 2 light kit. Any help from owners would be appreciated...

I noticed this leak on my BX2350. Then I did a search on the forum and found that others have experienced a front axle leak as well. Is it often in the same place? I noticed that some indicated that switching to 80W gear oil may stop the leak, but I'd still prefer to change the seal and then...

The top tabs on the panel screen on my '06 BX2350 are broken so the screen doesn't align or stay in place properly. The first screen did the same so it was replaced under warranty. Do the new BX's have the same plastic tabs or are they made better. I'm not going to bother replacing the...

What's the average life expectancy for an OEM battery in BX series? I understand it may be relative to many factors, but how many years of service did you get before replacing the original battery? Thanks.

I've always thought that wheel bearing grease was superior to extreme pressure grease or multi-purpose grease. Yet while reading a tube today, it indicated that wheel bearing grease "may" be used for "certain" farm applications. Which is the best for tractor, loader, mowerand snowblower use...

I understand that Kubota doesn't offer a hydraulic chute deflector on the BX2750 blower. Has anyone successfully used a stock hydraulic deflector from another Kubota model on a 2750? My initial search only yielded results of a talented forumite who modified another company's cylinder to work...

The manual for this blower lists one size of shear bolt and its part # for the drive line on on page 23. On page 35 in another exploded view, the same part lists another size of shear bolt and a different part #. It does the same thing for the shear bolt on the drive shaft. Page 23 lists one...

Here's the photos of the BX7326 valve on a BX2350

I just installed a front blade and tried it out for the first time. It seems to me that the skid shoes do a pretty good job of tearing up my stone driveway. Is it naive to think that I could cause less damage without them on? I'm sure they would do a better if the ground was frozen but we are...

I just picked up my 2009 Kubota Canada calender from the local dealer. It's got great photos of Kubota equipment, just as the 08 calendar did. Does Kubota USA print such a calendar? I live near the border and if the US version has different pics, I would like to pick one up at a NY dealer so...

Kubota recommends it be changed at 2 years. I've got less than 150 hours on the deck. Isn't it a little premature to change it?

I currently have a box scraper on my BX2350. I used it to push snow last winter with mixed results. Are there any advantages to purchasing a rear blade that can be angled and using that in place of the scraper?

Two of the last three times I've started my '06 BX, it really shook and rattled like it was missing on a cyinder until it warmed up and then it ran smooth. While it was running rough it also produced a lot of black smoke. Any ideas of what it could be? Thanks.

I originally wanted a rear snowblower and FEL on my BX2350. After researching, however, I've learned that by the time I install the rear blower with hydraulic chute rotation and a hydraulic chute discharge control, the cost would be the same as a front blower. Therefore, the dealer is...