MapleLeafFarmer's latest activity

same here.... treatments seem to delay a few years but the inevitable seems to happen and even the most diligent ends up looking the...

you have an older version but these are some spec's for their newest that can give you some guideline re flue size etc..

I have the same tow behind splitter and gosh its been used more than you can believe and still purrs like a kitten. Mine has a B&S...

I agree skakes or sides get in the way sometimes. I meant removable stakes like this - gg

75 year old stick still running strong. I doubt any of my hst, powershift, hydrostatic transmissions will still be running in 75 years.

I have never had the exact same model but for the dip stick try and give it a 1/8 or 1/4 turn first before pulling on it. the little...

if you are looking for a diy solution that easier than the spring fix a simple counter weight system on both corners is cheap and easy...

generally their wrenches have higher rpm and torques.

Is it all broken on the surface? If you have enough soil depth and glass is on the surface you could dig a big hole, push top few...

could also be cut that way to be used as a tensioner on a wire strand or to offset tension on an end post from pulling in and the groove...

Residential: (200a panel or less) - monthly fixed charge C$9.46 / U$6.62 - cost of power C$0.09587 per kWh /...

we use barbs/clamps for poly water pipe but rigid pvc pipe like we use for pools we simply glue fittings / couplers /etc... unless in a...

What's the reason you can't use a conventional stainless steel barb fitting and s/s hose clamps? Underground is one place I wouldn't...

I wouldn't do it. Generally in life you get what you pay for and you do have a top shelf tractor. But heck from their ad it is "cutted"...

i found out chippers in the size you are considering to be way to slow. Way to slow. I found other solutions and sold my...