Massey2019's latest activity

I went and checked and all 6 screws were not tight! Each took about 1/4 turn. Started and everything seems fine. Can't thank you...

Check the screws the hold the gauge unit to circuit board..... When mine was delivers the temp gauge did not work.... What do you know...

Well, I went out this morning and started it up. Thought "why not?" and gave the cluster a good whack. They both started working! So...

Your secret is safe. I'll give it a smack to see if anything works but have a feeling it may get expensive..

That might be painful. I will figure out the PN and call the dealer. Finding no wiring issues, I'm starting to wonder if the dash...

Appreciate that, will save $40. Will keep looking for the cause

I can say for sure when temp sensor is bad (dealing with that presently) it does not affect fuel gauge, oil pressure light, tachometer...

The connection for the temp has the black ground wire. I pulled and found no corrosion and the connector showed marks from sliding over...

Dave, Appreciate the information. If I cant find a ground issue, will look at sensors. But, I will check the connection on the sensor...

I will work on it today and check this out. In my early days, I used to wash the tractor after each use. Probably not a good idea for...

may help...

According to wiring diagram there is one single black wire that supplies most grounds for most dash functions... It s on the connector...

I have a 2019 GC1705, great tractor. Have one issue I haven't been able to figure out. First started with the temp gage not moving...