MattB4's latest activity

Matt, I installed the 14MM QD like these 1 Set M14x1.5mm Hydraulic Quick Connect Coupler Female Thread Pipe Fitting8G | eBay so I could...

Found nothing so far. Might have to get creative and perhaps have a short hydraulic hose with adapter to fit the QC on one end of it.

The selector already directly hooks to the hoses that came with an auger I got but having a quick connect would allow for containing...

Anybody have a source for an adapter from the Thumbs auxiliary flow selector to a Hydraulic quick connector? The fitting on the selector...

You can easily search them: Google Search

Looks good from here - and you have a cart to load rocks and stuff! I got the same plate and found a bolt on hitch plate from off TEMU...

Went ahead and built the drive motor brace. It mostly came out good once I got all the parts I needed to build it. One error I made...

Amazing isn’t it? You have a rock sticking up 8” in a field. The other 99% is under the ground and weighs like 5+ tons.

Mine has a sticker on the valve cover saying "Made in Japan". Do not know if China makes any Kubotas. As a quick review of the engine...

I plan to go with a different smaller battery, too, but my 7yo original is still going strong. I plan to use a smaller U1 riding mower...

Couple of modifications this morning. The floor plate above the valve body is a pain to remove due to having to pull off all the floor...

It is 12vDC. There are many of these units being sold to RV'ers, truckers, farmers for enclosed cab tractors and such. They are the same...

Operated the TT-17 this morning for about an hour and a half digging up some stumps with a ripper tooth. It had poured down rain...

Your pix remind me of my disc mower conditioner delivery. Driver calls in the evening while I'm out of town. Won't fit in my yard...

A question for anyone that has a cab with 12vDC Aircon/heater. The temperature settings do not make any sense to me. It is not in...