Mattyboy936's latest activity

Ok I did notice a groove in the bucket tilt as well. But that groove is up by the spring… where I put the groove on the up/down at the...

When I cleaned it up and reinstalled the sleeve over the all bearing and needle I put the groove on the bottom side of the cap. Does...

Here is what I found when I pulled the cap off the valve. Both were pretty caked with gunk. Unfortunately I was in the woods on my...

The tractor has sat outside for years uncovered so I could see it being rusted. Inside. Poor design flaw. I will pull the caps off and...

The spool (the actual rod that moves back & forth thru the valve) has a radiused groove in it. Under the detent cap is a spring with a...

There should not be any pressure or flow under those caps. Just be careful since there might be some spring loaded parts that will want...

Try this site and search model "ml108h". It's got a lot of exploded diagrams of your valve...

Here’s some questions. Maybe a dumb ones but if I unplug the loader quick connects and take that cap off the bottom of the valve to see...

Yeah, it’s on Mahindra 3510. I attached a photo of the little diagram attached to the control valve. It shows to push it forward almost...

Here is my loader control valve. The loader is a ML108H and the little diagram shows a float function on it.. and to push upwards past...

I wonder.. would the control valves are the same?

Does anybody have a manual for the Mahindra ML108H front loader? I was curious to see if there was an exploded view of the control valve...

Well, I believe it’s a 2004 so if it’s been sitting outside for most of his life, I would assume that could be an option. I will have to...

The float assembly on the valve can fill with crud Depending on age of machine and how the valve is mounted. I believe some and maybe...

Right. I know it’s different brands but the John Deere I use at work does the same thing. You push it forward and it’ll somewhat click...