Recent content by meexiles

This machine was blowing fuses, first in the HEATER switch position. So last weekend, I disconnected the glow plugs from the circuit, and ran the tractor about 8 hours over both weekend days, starting fine. Fast forward to this weekend, and it started blowing fuses again. I think I have traced...

I am blowing the 30 amp fuse when the key is in the "heater" position. I have removed the copper bar linking all of the glow plugs together. When doing an in-place test, the resistance is about 0.2 ohms across each plug. So, I am trying to remove the glow plugs in order to bench test each one...

So a lug bolt on the front tire of my 354 has become loose. I have replaced the lug bolts on one of the the rear tractor tires. Are the front ones fastened similarly to how the lug bolts in the rear affixed? It seems like it may be a different fastening mechanism, though, since the loose lug...

I had no flow on the outlet of the fuel tank on my 2360. After blowing compressed air into the tank from the lower fuel filter, I cleared the obstruction but want to use something to loosen and clear the gunk. I know the tank is plastic so I don't want to use Methyl Ethyl Ketone (MEK) since it...

I seem to continually blow hydraulic fluid out the fill vent under the operators seat, and have to regularly top off hydraulic fluid. Is this normal? I replaced the fill vent with a new one, to no avail.

I had my 2-bottom plow on and lifted it up. It didn't stop and now the top link is vertical plow won't come down. Adjusting the "fall control" knob doesn't seem to do anything. Does anyone have any suggestions as to how to get out of this predicament? Thanks!