Recent content by megotatractor

Skol ! Bids starting at $25k I had acquired a badly dented hood but didn't know what to do with it. With the tools I have the best I could hope for is an amateur job of filling the dents and sanding. Suppose I have the wrong type of sander to get a good level surface. But then I had this...

It has come to my attention that the water pump is leaking on my 2210 . A new pump costs over $300 ! Anyone happen to know where I might aquire one besides at the gold dealer? Thanks.

At low angles you can see that the 62c deck is cutting grooves when I mow in a back-and-forth pattern. It also cuts a sawtooth if I mow in "spirals". I have always had trouble since I got in 2004 trying to get it to cut perfect. Somehow I can never get it level. I use carpenter's level...

Hello, I have 31/2 acres of yard in the country, some of which is former horse pasture. In the 10 years I have been here it is slowly improving with the use of a 900lb water roller in the spring and after rain. As you can see in my profile I have a small tractor which I have used with a rear...

It's finally time. My 2210 is 11 1/2 years old. Cleaning it up for end of mowing season (and start of snowing season) noticed a large tear/bulge in the front tire. I have the Carlisle HD field Trax (HDAP in JD lingo). Looking more closely it appears both front tires are extremely weather...

I recently hit a softball size rock and destroyed a $70 set of blades. I was so pi$$ed I went and bought some Oregon blades. I saved $20 on a set of blades that LOOK exactly like OEM but.... the Oregon blades started out dull and got even duller FAST just mowing the grass! I was going to...

Just last week she hit 900 hours! Just getting broke in :)

876 hours ! Seems like it was only 2004 when I had her delivered... Oh, wait, I have a pic from delivery day....

11 years old and still going strong.

I have a 2004 2210 with 875 hours, now starting to idle too low - 1200- and overspeed when I cut the PTO to 3400. How do I adjust? Can anyone point me to an online manual? Thank you.

Got any resin garden statuary you no longer use? contact via message on tractorybynet. thanks

I have what's left of an antique steel-wheeled farm wagon. Basically just the wheels and axles are all that's left but most of the important front swivel parts are there, very little wood remains. I had painted the wheels and put them out for lawn decor but had the funny idea of making a...

Not sure where it's leaking. It started with subzero weather last week and I plugged her in thinking it might be going to maybe snow. It didn't snow and I forgot to unplug the block heater. Now I have puddles. There is a 8 inch coolant puddle under the engine. I see bright green around the...

850 hour service; I drove the tractor up onto blocks. I did the hydro stat service AND motor oil change at the same time. Very easy, just wish I had a lift in my garage...

Some say it is difficult to get at the hydrostat suction screen on a 2210. I've done it 4 times now and it gets easier every time. Note photos attached. step 1; drain hydro fluid step 2; remove suction screen cover retaining nut and washers. step 3; with pliers move 2 clamps on rubber elbow to...