Recent content by millers1

Looking to add a tooth bar to my 2210's FEL. Lots of options out there. What tooth bar have you added to your FEL and would you recommend it?

I'm thinking of replacing my X320 with a comparable X380. I do quite a bit of backing due to obstacles so I did the reverse safety (RIO) jumper as soon as I got the 320. My question is, is the X380 set up the same as far as the RIO bypass?

My X320 has the 48" 3-blade deck, with BM20007 mulching kit. The replacement blades for the mulch kit are M127673. I'm seeing other blades available that supposedly will replace the M127673. There's some standard looking blades and some wild looking Predator blades. So.. stick with the...

My 2210 CUT is 8 yrs old and I've got only 140 hours on it. I'm just using it around the yard, to move snow, mulch, dirt, and do some grading occasionally, etc. I've just started clearing the 3/4 acre lot behind our house. It's mostly brush and I'm using a ratchet rake attachment on the...

I'm working on clearing brush with my new ratchet-rake attachement for my trusty 2210. Should picked up the ratchet rake a long time ago! Running with the FEL and ballast box, what is the general conscensus on tire pressure? I know opinions will vary but what are would you run with this...

I have a few impements for my 2210... cat 1 scraper, post hole digger, ballast box, etc... I was hoping to go with the i-match type of quick connect system but the implements have different widths between the pins. That pretty much rules out the i-match, right? What other quick connect...

Just traded the LT155 on an X320. The 320 has the 48" deck with dealer installed mulch kit. The chute really serves no purpose other than getting in the way, with the mulch kit installed.. so I want to remove it. It looks like the two screws that hold the chute / hinge assembly are...

I pulled the left side cover and found a decal on the side of the Yanmar engine with the engine model number... where can I find the engine's SERIAL number?

Curious if this adapter will work on my 2210 Deere? https://www.imcuniverse.com/store/easychange.htm

Now that we've had 2' of snow, I'm thinking it's time to invest in a snow plow for my JD 2210 CUT. The FEL / bucket did a decent job but the plow would have made the job easier. Is the JD front snow plow assembly 54" or 60"? Is it a quick connect setup like the FEL?

I need to replace the leaking battery on my Deere 2210.. today. Being Sunday, the local dealers are closed. I need to get to the auto parts store but need a battery part number.. which I cannot find anywhere on the 'net! Anyone have a cross reference battery number for a 2210?