Recent content by millville wayne

  1. M

    hi would like to update my account, thank you wayne. i will not be able to read reply until the...

    hi would like to update my account, thank you wayne. i will not be able to read reply until the new year merry Christmas to all
  2. M

    what width blade can be used on front end loader on 4wd l3650 Kubota 38 hp. to plow snow and...

    what width blade can be used on front end loader on 4wd l3650 Kubota 38 hp. to plow snow and grade gravel drive way from front thank you in advance , its quite a while since i was on here. p/s how much hp required to use 8 ft fisher and what would be required to make it fit my tractor
  3. M

    1992 kubota 3650 4wd

    hi, 1992 kobota 3650, awd, shuttel shift, is creep speed same as low speed , what is best procedure for snowblowing with 6 ft blower on pto. speed, rpm, ect thank you wayne
  4. M

    kubota 4 wd will not move

    hi i have a l 3650 f 4wd kubota i changed hyd fluid , first pto would not engage now it will. i was trying different gears with main shift leaver also with shuttle shift f and r while still stopped ,also i changed speed leaver from fast to creep just so fluid would go thru...
  5. M

    governor on international B275 gas tractor

    hi I have B 275 international gas tractor. the governor stopped working , it runs wide open when I give it some throttle, I have to pull throttle back by hand. I took side cover off there was no oil in there I was told there should be. the tractor was also down some I topped the...
  6. M

    carb runs rich & Gas in oil pan - International B275

    I just installed a rebuilt carb after a long battle with the old one freezing up. Now the tractor runs way too rich, and there's gas in the oil. I'm in Nova Scotia and the new carb came from Ontario. So I can't just drop over to the guy to have him check it. I'm thinking maybe the wrong jets...
Top