Recent content by missesalot

dang. I even looked first like a good forum citizen. Funny how when you search on 1.25" something different comes up than if you search 1 1/4". Thank you!

I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?

I ended up buying a Ratchet Rake following the responses here. I was confident that it would be great, but after using it for the first time this afternoon I can say it’s significantly better than I thought it would be.

Hey all, seasons greetings! I have a 45hp tractor with a backhoe, FEL and bucket, and a grapple. I do a lot of brush clearing. I'm considering a ratchet rake for light weight grading of lawn areas, as well as stone driveway, in addition to its purported capabilities around brush grubbing etc...

Hey all. Was moving some snow today with my Tc45d super steer and noticed that I was unable to get the FWD lock to engage. It operates fine in the FWD auto position. This is the lever all the way to the left on the left side. Does it make sense to start by removing and lubricating the cable...

I have a TC45d that is 4wd, and am in the market for a set of turf tires with rims. I have found a set locally that came off a TC35. There is overlap in the specs between the two machines, which are different between recommendations for tire size in 2wd and 4wd. Is there any reason to think...

What can you guys tell me about identifying this old disc harrow? It has a ford decal on it so someone at least wanted it to look like it was a ford. It’s 6’ wide.

I found what I believe to be a Massey #25 disc. It has the round pipe frame and the twin levers for adjusting the angles. It’s 8’ approximately. It’s in need of paint, but otherwise good condition. Might need one bearing box fixed or replaced, which I think is easy done. Couple questions...

I’m considering a 6.5’ disc harrow from Lowery Manufacturing for my 45hp NH TC45D for putting a few acres of food plots. I have the option of sealed bearings or friction bearings. I have tried reading up in the different but I’m not getting a clear understanding of the advantages of each...

New holland Tc45D with 758c backhoe. I use rear remotes to control my grapple. At this point I need to disconnect the backhoe in order to use the grapple, then vice versus to again use the backhoe. Is there a way to connect my rear remotes and my backhoe at the same time and have power to...

Added a grapple from MTL to my TC45d. Setup with long line set to existing rear remotes, line set provided by MTL with 1/2" Pioneer fittings with quick connects. I have a persistent leak between the male pioneer fitting (grapple side) and the 1/2" to 3/8" adapter. I replaced both fittings...

I have several plugged grease fittings, wondering if anyone knows what size is used on this machine or whether they are SAE or Metric, as they all seem to be the same size. Dealer is exactly zero help. Same situation on my 758c backhoe. Has anyone ever used those grease fitting clearers that...

I am considering this grapple: 72" Economy Dual Cylinder Root Grapple - Buy Attachments 4 Less I am considering this due to price point, and availability due to long lead times at EA. Is anyone familiar with this company, this product, or products like this. The person selling these in my area...

Looking to add a back blade. I have a 45hp tractor. Found a used 8ft John deer model E0 880 for $300. Is this going to be the right size? I plan to use it for dirt leveling, light ditching, and snow. I am interested in that model, the price, and sizing. Thank you