Recent content by mlhunter

. . . been awhile! My brother and are looking to put together a farm and fence "sprout" cutter for my PT 425 by running a 12" saw blade off a higher speed hydraulic motor. The blade speed we need is doable but to select the right motor I need the specs on the PT 425 PTO pump or the stump...

I need to disk fire breaks for prescribed prairie grass burns on fairly small fields. These areas have been disked with a large tractor and disk within the last year or two so the soil should not be too packed. I also want to maintain some food plots. I need to have power way to raise and...

Hi guys! Its been a couple of years since I've been on here and I now have 165 hours on my Pt425 with (EH72?) 25hp Robin/Subaru engine. Overall I've been satisfied with no problems. However, yesterday I encountered something new. After using the brush cutter for about an hour to mow the...

Last fall I used the PT 425 60" rake to de-thatch my yard and scratch the surface at the same time for over seeding. The effort was successful but I could not use the rake in free float as the rake doesn't have enough weight to pull it down to the ground. Using draft control the rake followed...

There seems to be no end to what I can use my PT425 for. Attached is picture of using my PT425 to help level up a swing set from one side. We then leveled it in the other direction. Braces and extra screws were added along with ground leveling. It looked much better! I also have built a...

I worked with my PT425 and mini-hoe to remove some woody shrubs and a deteriorated stump yesterday. The tractor and mini-hoe did a fine job but today I noticed that the grass that was underneath the motor area appeared to have turned brown. Nothing is leaking so I'm suspecting heat caused this...

I got my PT425 to MO last Friday. I have five hours on it now and I am very impressed with the machine's ability. My first use was at the farm cleaning up a fence line about 1/4 mile long. On the third pass the machine just stopped and would not move. Motor was running and everything else was...

After a lot of thought I ordered the following items from Scott this afternoon. PT 425 Tractor T3325 45" 4 in 1 Bucket T3026 48" Brush Cutter (Solid Tires added to Brush Cutter) T3227 18" Stump Cutter T3319 Mini Hoe T3292 Trailer Towing Adapter I got the last PT425 they had in stock with the...

Thanks to this forum I have learned about Power Trac tractors. Last Friday I visited Power Trac at Tazewell, VA and Scott Gentry did a very good job of acquainting me with the PT425. He was able to answer all my questions, provided a demo and even let me drive it a bit, and arranged for me to...