Modrob's latest activity

Got the pulley to come off. No lube needed. It would have taken a lot longer without all of the help. Never used a taper lock before.

Don't know how to take that apart, but I do know it's much harder if I try to repair something when I'm tired and frustrated. Do...

Not too hard to do, but if it were me, I would do it hydraulically with a second function solenoid. However, I admit that I rarely need...

An additional pair of hydraulic circuits is an upgrade that I use a lot especially with my V-plow and swinging mini hoe. It is also...

If I changed powered implements often, I would definitely go with a diverter valve.

$6K = ouch! I paid $8K for the entire PT425 in 2001. Yikes! I agree with the suggestions to see if you can have the shaft filled and...

Good luck. If you can get the scab pump model, the configuration for the model should call out if it is unidirectional. AFAIK, some...

It is the same pump but the scag turns opposite. Dont know if this will work or not. Has different plugs on both sides gonna have to do...

Older scag sthm tram pump will fit in older twenty four twenty five and the twenty four twenty two powertrac.Ask me how i know…

On our new 425, I’m having trouble (typical for me having troubles😆) with the Float feature. I had found it on the old 2001 unit by...

I find similar with my snow plow angle function. I keep it pushing right up and down the driveway twice and I'm done. Then I set it to...

I would prefer manual standard quick attach and using a joy stick that controls the grapple and loader functions.

Some funny stuff there! 😆 How about the “joy stick” control—the tall one? I’m used to the shorter one on the old unit, and this new one...

Do it with the 1850 dual tires. Cut many a tree down for no reason other than tree wrap

Just don't forget about wrapping it around a tree on a downhill slope! (ask me how I know :ROFLMAO: )