Since there is replaceable pin which I have on hand (see pic 3548) I would think not. But... The tube the pin slides thru is welded to the seat mounting plate - if the pin was used for alignment - maybe over penetration on the weld? I really want an OA rig.
There is one pin (see pic 3548), the...
Tonight was a fail, again.
I heated the tubing thru several heat/cool cycles. Tried the shop press again and bent 2 grade 8 bolts I was using as a press pin. Then used a punch and 3 lb hammer - nothing but disappointment and sore thumb, I missed on one swing. Tomorrow I will cut out the center...
I am replacing the seat on my Ford 1920 tractor and need to remove the hinge pin that lets the seat flip forward. I can not get it out. I cut the pin in two places (far left and right) to get the seat mounting plate out of the way - the part of the pin in the center that is still attached to the...
I am thinking of getting a SSQA receiver mount (2”) for my 40HP LS 4WD tractor to move trailers around the property. All trailers will be moved empty. The two larger trailers are a 16’ stock trailer and a 14’ 14k dump trailer. My FEL is already SSQA capable - I have several attachments already...
I purchased the Delco, 14’ x 83”, 14K.
Before I haul my first load I have a couple hitch / leveling questions. My normal trailer towing has been a small 10” light duty trailer or a 16” stock trailer with a couple cows/steers in it - way less than what this dump can tote.
Should the front of...
One of my reasons for buying is I need gravel and dirt in places a dump truck can not get to, but my truck or tractor can. My last load of gravel I had delivered was $320 - $180 of that was delivery. That said, if I need to gravel the entire driveway, I'm having a dump truck bring that in
It has the tarp kit. One of my reasons for buying is I need gravel and dirt in places a dump truck can not get to, but my truck or tractor can. Wow, no charge for delivery? My last load of gravel I had delivered was $320 - $180 of that was delivery. That said, if I need to gravel the entire...
Good catch. I did not have a 2-5/16 ball so I picked one up at our local farm store. What I did not think about was the base of the ball was bigger, so it would not set properly, so in the pic the ball is tilted. Between me, the salesman and shop supervisor we decide i was good to get it home...
I was torn between the 12 and 14' in the beginning also. The questions I asked in October 2021 and the answers I got me realize - nobody ever wished for a smaller trailer. I went with the 14", the cost difference was less that 1k, and for a 10k purchase i decided to go with the 14'