Mudfarmtruck's latest activity

You're just running in circles with what you're doing and wondering what to do next. What you need here is a flow meter, not a...

I I used a mechanics stethoscope on the pump and I hear kind of a wheezing /whirring noise. I’m going to do what you just talked about...

Simple test to try if it implement pump is accessible. Try operating a function like curl fully and hold joystick in that position and...

The power steering pump hard steel lines with rubber lines closer to the front of the machine . The 3p / loader pump there’s a 3/4” hose...

Sorry for the late reply . As for the update . Only getting low pressures on the gauges. The 3 point hitch goes down , but won’t lift...

For whatever reason my draft link at the bottom can be seen dripping slow drips of hydraulic oil. Also I have this icon on my dash...

So my 3 point hitch is working under load . Could this be something stuck with the flow priority valve ? I need to read more about the...

That's why you only read 30-40psi. The P port is the pressure Input to the valve. Teeing on that port will only have "Return" pressure...

So it no doubt has at least one remote valve on the back, totally separate from the loader valve. If you plug your gauge (or A gauge)...

30-40 psi is typically a return to tank pressure. You're not teed off the correct line or you're teed on the down-stream or open center...

its a m100x. Its a cable controlled open center hydraulic system for a loader controls are mounted in the cab. the 3 point hitch is...

Could it be possible that I have the centre valve that puts fluid into the ports located incorrectly ? . My pressure gauge is off the...

The pressure gauge is showing 30-40 psi when the control valve is open . (Lift bucket) The open centre valve has a direct connection to...

A basic review of hydraulics. 1 a pump moves oil it does not create pressure. 2. a valve controls how oil is directed. 3. In an open...

People always tend to over torque spark plugs and install them with dry threads which is an invitation to galling or cross threading...