Mate,
Thats great INFO. the oil i have is just H, without the C designation so ill go back on to Uniteds web page and have another look. I suspect they have sent me the incorrect oil.
D
Thanks for this info. I have contacted United Oil and am waiting on a response. The oil is United Oils VESTA H68 Hydraulic.
It meets Denison HF-0 thru to HF-2. and Cincinnati Machine P-68, P-69 and P-70.
I dont know what all these specs mean.
Ill have a look at the 134D spec and see if I can...
Hello everyone from Papua New Guinea!
We are up in the Rainforest at a place called WAU. With a large smallholder farming community.
I need to add hydraulic oil to the tractor and i have lost the manual somewhere!
I understand that the hydraulic oil is also the transmission oil so I need to be...
All,
If you are able to have a look at the attached photo, you will see where i am with this.
The exploded diagrams are slightly different but you will see that the front seal has been removed. Thats the one that was leaking.
I really dont know where to go from here, I would have thought that...
R Neumann.
Attached snip from what you have sent me looks accurate.
If you have a look at part 12 it just looks like I could bash the pin out now that I have removed the locking bolt and washer.
Whilst the picture is upside down, part 12 looks like its only a washer.
Your opinion?
G'day everyone,
We are NKW Fresh produce working in WAU in Papua New Guinea.
We have a 2004 New Holland TD80D with 2000 hours.
Constantly repairing bits and pieces because our drivers are not very careful.
Parts are hard to come by so often the tractor is laid up.
We purchase Fresh Produce from...
Hi all,
My TD80D has a badly leaking power steering hydraulic ram. Due to our location it must be removed and taken away for repair.
Whats the process for removing the body end pin as it seems to be deeply embedded in the frame and I cant imagine that its a circlip.
Dave from Papua New Guinea.