Recent content by No1umfan

I just developed a pinhole leak on a hydraulic line on my KL 401 front loader. It’s the same one that went bad a couple years ago. At that time, Napa could make me a new one. But now I’ve driven around to four places and nobody has got the right fittings. Anybody know what these fittings are...

Just a final follow up on this thread and thanks to everybody. Yes it was that relay. I finally got a new one and replaced it. It’s behind the instrument panel. PTO engaging reliably again!!! Thanks!

If that’s the bearing I think it is it seemed like it was just going to be a bear to get the mower disassembled to get to the bearing. I just held my nose and paid the dealer

Wow. Thanks. it definitely sounds like what my problem is. The link you sent regarding the solenoid relay and the solenoid itself doesn’t really clearly explain where each of those are. Says that the solenoid relay is under the steering column or under the instrument panel. Not 100% clear do...

I have a 2012 Kioti DK45HSE diesel tractor. The PTO does not consistently engage. If I turn it on the indicator light on the switch does light up, but the PTO doesn’t turn. Sometimes if I drive around, it’ll suddenly engage. Or other times I will turn the tractor on and off and start it again...

I saw some videos on stump bucket attachments, particularly the ones with the grapple. Started to interest me. But then I looked into it and saw a couple threads on here that said you’re likely to damage your front end loader. But most of those seemed to be talking about somewhat smaller...

Hopefully the final update on the problem. I got a six dollar replacement relay from Amazon by Bosch. Plugged it into the blue relay on the left. Nothing. No fire. Just for kicks decided to swap it out and put the new relay to replace the right sided blue relay. Boom!!!! everything works like a...

Thanks

Thanks. Fuses are all good.

Cool. I never even noticed that diode which I’ve read can be another source of failure. How do you check if the diode is good?

Which one of these is the fuel shut off relay?

Yes that’s helpful. I guess I’ll put a multimeter to it when I get home tonight and report back. It’s the 3 prong type harness. If I don’t see any power is it possible that one of the relays is bad. I do remember one of those went bad soon after I got the tractor and had to be replaced while...

I might be having the same problem with my DK45SE HST 2011. Can you post a link to where you got the replacement relay? Thanks

Trying to troubleshoot crank no fire. Fuel is getting to the filter bowl. Fuel pump is working. Can’t seem to completely confirm that the fuel solenoid is working. If I take the solenoid off and have it connected to the electrical harness, and turn the key I don’t see the plunger moving at all...

I need to replace the V belts on my Ford new Holland 918 H flail mower. The specs call for a 5/8 x 48.8 cm belt. That’s obviously a hard belt to find. Am I better off going with the 48 inch or 49?