number two's latest activity
-
NRepaired dozens of stripped sparkplug hole threads back in the 1970's while working at an independent Volkswagen repair shop. First you...
-
NParticularly necessary in aluminum heads. The Al/Fe differential expansion "works" the joint. A little piece of aluminum cracks loose...
-
NAll you have to do to chase those threads is put some good old axle grease on your tap - and even if you were to get a tiny bit of...
-
Nnumber two reacted to Davenj4f's post in the thread Best Way to Clean up Zero-Turn Seat? with
Good Post.
Regardless how you clean it, I always rub Neatsfoot oil into my seats of vinyl, or whatever they're made of, to keep them from drying... -
NA pto shaft with a plain u-joint on each end works best if the angles of each joint is equal. So, with the hitch pin near the center of...
-
NIncorrect. It requires equal co-linear AND co-planar alignment of the input and output shafts, with the center of the intermediate...
-
NMy 2020 MX6000 just completed 5 years of use with 1250 hours on the meter, so 250 hrs/yr. Use has slowed now that the jungle has been...
-
NJohn Deere 5045E bought new in 2021 has 592 hours. Used for maintaining 20 acres, food plots, garden, mowing, firewood harvesting, and...
-
NA caution about removing PTO shields. Years ago a friend was feeding cows, roundbales on a 3pt carrier.. Hung the string on the tail...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Tell us what hasn’t tripled since 1990? A 50lb bale of hay was $3 here in 1990. Now 35 years later, it’s like $8. I always viewed...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Be nice? Hey man, you came in implying I’m screwin horse owners….remember you said “who’s screwin who”? I don’t appreciate that. I’m...
-
Nnumber two reacted to LouNY's post in the thread The Life of a Custom Mowing contractor with Good Post.
Plus being California, how far did the hay have to travel, how much did the water cost to irrigate that hay. Then is that Alfalfa...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
What did a house cost in the 80’s compared to now? 1/4 of todays prices? College for kids? In the 80’s it was $5,000/year to go to Penn...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
I got a call from a Customer yesterday wanting to know about the availability of hay. I told him I don’t yet have anything to sell him...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
A few from a few days ago. Under the power lines, on flood plain. Barely dry enough to bale, but the baler showing plenty of dust.