Number15's latest activity

  • Number15
    Number15 reacted to LD1's post in the thread Tiller Vs Plow and Disk Etc with Good Post Good Post.
    Plow in the fall after harvest. Disc in spring once dry and no more frost or freezing temps. No need for a tiller. Discing is faster...
  • Number15
    Number15 replied to the thread 1845 v. 1850.
    Yeah the 1850 is certainly the better value, but if I buy that I think I will need to keep the zt for the house yard. 1850 will for...
  • Number15
    Number15 reacted to BigDaddyEureka's post in the thread 1845 v. 1850 with Good Post Good Post.
    Yeah elevation and slope are hard to capture in pictures but I think you got it pretty well actually. For what you've got there I'd...
  • Number15
    Number15 replied to the thread 1845 v. 1850.
    It's a grass pasture. Some of it needs to be bush hogged still, but the intent is to have more grasses in the fields and less brush. I...
    • PXL_20211017_164758774.jpg
    • PXL_20211017_164838879.jpg
  • Number15
    Number15 replied to the thread 1845 v. 1850.
    I'm really struggling if I should move up to the 1850 for the extra pto power as a trade off to maneuverability. i have many areas with...
  • Number15
    Number15 reacted to Hay Dude's post in the thread Kovaco Electric Skid Steer with Good Post Good Post.
    Naaahhhh. Those electric skid steers could also be used in mines, where zero emissions are paramount. They could also be used in areas...
  • Number15
    Number15 replied to the thread Thoughts on new Ventrac 4520?.
    I understand tier iv is an issue but I was hoping for a more powerful diesel in the ventrac. I had a demo on my property and I felt it...
  • Number15
    Honestly I considered a lot of brands. For me it came down to availability. From what was available I chose Branson because of its...
  • Number15
    Number15 reacted to ernemats's post in the thread 1845 v. 1850 with Good Post Good Post.
    I have an older 1845 and I like the size of it for most acres I mow but I also have a 422 which I use around the house and in smaller...
  • Number15
    Number15 reacted to BigDaddyEureka's post in the thread 1845 v. 1850 with Good Post Good Post.
    i think that probably depends on your lot. I have a much smaller PT-425 and a mower, and it does a great job! But there are some...
  • Number15
    Number15 replied to the thread 1845 v. 1850.
    Any opinions on if the 1845 is nimble enough to be a lawnmower replacement for the zt? Understanding that it cannot turn it's own length
  • Number15
    Number15 reacted to SpringHollow's post in the thread 1845 v. 1850 with Good Post Good Post.
    You do not need a separate set of wheels - just remove the outer ones.
  • Number15
    Number15 posted the thread 1845 v. 1850 in Power Trac.
    Anyone have any experience with the 1845 and 1850? My situation I have a nice branson tractor but it does not do slopes well So the PT...
  • Number15
    Number15 reacted to SpringHollow's post in the thread Pto rpm question with Good Post Good Post.
    A 6.4 cubic inch motor will give you 540 rpm at wide open throttle (15 GPM) on the 1845. So something in the 6 - 6.5 cu in range would...
  • Number15
    Number15 replied to the thread Pto rpm question.
    Thanks for the replies. If I get the 1845 I was thinking about getting a Lane shark and trying to adapt it. Has anyone else done that?
 
Top