Recent content by offroadr

I have a 3320 with about 200hrs on it and I am noticing that I no longer have they hydro speed or FEL power I used to have. For example when I start moving in 'B' range it will take off with a decent acceleration and speed but then slows down. RPM doesn't change it (once you hit an RPM that...

I don't have the same power I used to have in my FEL. Fluid level is fine, checked the main filter as well as the small inline, all look fine. I have some power but it wont lift like it used to. Hydrostat and PTO all work good

I had mice get into the switch area and eat all the wires. I got the new switch and harness from JD. I still cannot get the switch to work. I have 12v to the switch so I do not think its a fuse issue. I could not find a fuse for the throttle lock anyway. Any thoughts?

I checked with my dealer and they told me the kit is $1300 DOH. Is there a non JD alternative? No way am I spending that

Can someone give me some more info on the plug under the seat? Is it wired to the light switch on the dash? Is there a wattage limitation to what it can power? Thanks

I just got my new 3320 and noticed that in a hard turn (either direction) the tire rubs the FEL hoses pretty bad (enough to wear the protective sleeve and push it up). Is this normal? Any easy fixes?

My new Jonh Deere 3320 was deliver this afternoon. I got about 3 hours on it tonight moving logs and dirt! The guy unloading is from the dealership

After a year of research and dreaming of a new tractor I ordered a 3320 with a CX FEL and a box scraper Saturday morning. The dealer gave me a price I couldn't refuse and the 1.9% for 60mo made a Deere affordable which I thought I would never be able to do. It will be 2 weeks before it gets...

I tested a new EX3200 this week and I really liked it, especially for 15,999 with a FEL. With a 3320 JD going for about 20k with the 300cx, I am having a hard time justifying the extra $$. A L3400 with a FEL will run around 18K. The Cub Yanmar seems like a decent machine (basically an...

with eHydro and ballast box I am being quoted 20,700. This dealer is traditionally high so I am curious.

I see ranges from 815lb to 2650lb. With most brands around 1200lb. How much do I really need to run average implements (bush hog, disk, box scraper)?

I am looking at a Case DX33 Hydro with FEL. It has 358 hours and looks good with no major abuse. I believe its a 2005/06. I think its the same as a TC33DA. Any idea on a decent price?

My local NH dealer has a used DX33 on the lot that I am looking at. I am not sure what year it is (2006?) or what they are asking yet. It has 364 hours on it. It looks in decent shape. Tires look 80% no serious wear. I am not sure what it is worth. Any thoughts?

What is the closest to the 790 with HST? i.e about 27hp and best value? I really like what I hear about the 790 with price/performance but prefer a HST and to not want to spend 25k to get it.

I could not find the difference on the website Thanks!