Recent content by ohio cuda

Zebra, I sure did late yesterday. The oil reservoir check was ok. The FEL control had a blown O-Ring as you suspected. Thanks for the tip.

Update- Work has kept me from getting much done. As suspected I discover the hydraulic pump became a cannibal and digested a lot of parts. I have a local shop that can reasonably rebuild and bench test. I'll keep you posted. This is also a good time to have the radiator flushed and rebuild the...

JD110, thank you for the information. I hope to get some time today and look further. Those fragments sure look to be that part.

Thank you both for getting up early. Jim the mistaken valve picture from YT looks a lot like the ends in that picture. I've never had one of these apart and wonder if maybe it's item #15 in the IPB you posted? The shape and ends look to be similar, just a thought. Here is what I found in the...

Jim, I'll remove that plug and send you those pictures later this morning. I've split my 8N and done a lot of work on that tractor, it's simple compared to this 2020 Deere or maybe it's just got me intimidated. I was looking at the pump in the transmission (on Line not mine) and it looks like...

TX I did as you requested with the both loader valves in neutral position. Hydraulic fluid started squirting out the return. However, I loosened the Return connection on the controls, the coupler end was so **** tight. I also found another piece of debris in the supply line to the spools...

I've replaced the screen with a new one from Deere. I'll post pictures of the plumbing. thanks for the reply Tx.

I have a John Deere 2020 Type T5R1C, serial number 1080650Twith 3200 hours with 48 FEL. The tractor is new to me and I知 just starting to use. Once I got it home I did the usual engine maintenance and changed the hydraulic fluid, cleaned filters on the transmission sump and the front pump in...

Those are some meats on the rear flusher. Old tractors are fun to play with and get a little work done in the process. I found this MF135 near Ashtabula Ohio. It spent it's life on a farm growing grapes, 2100 hrs on the Perkins Diesel, 8 speed. The family retired from farming and stuck her on...

I'm rebuilding my MF135 and need some help on the rear 135 emblems. After searching blogs it appears the USA 135 emblems are different mounting, who makes these? My pin to pin is 3-1/4 center to center and runs right down the middle north to south and 4-1/8 diameter. The emblems for sale have...