oldnslo's latest activity

Do you have a diagram or schematic for diverter valve? If nothing else maybe a couple pictures of the valve would help.

Rock shaft is a complete separate system from the HST. Charge pressure is usually low in the 100 - 350 PSI depending on transmission...

On opposite end of rod circled in blue it looks like could be a cotter pin missing. Not sure what that linkage connects to though...

Is it slow going both forward and reverse? Any noticeable new sounds or change in sound from cold to hot? Not sure but first thing to...

Will the recycle absorb moisture like gravel will? I think that would be the limiting factor on how effective it would be.

Well worth the price of admission. Altough I haven't gotten a ton of use out of the tech manual for my newest machine (2019 model...

Welcome to TBN! If you look at the parts book, the oring for the 3000 measures 2.825" (0.215" thickness + 2.61" inside diameter), so it...

I suspect the X750 will have a tighter turning radius than the BX but the BX1850 I had approx 10 years ago mowed as well or better than...

With front mount snow blower the BX with 4 wheel drive would be a nice feature since ALL the weight is on the front axle. BX also has 2...

Why do you think the pump is bad if the 3 point is fully raised?

Well, I learned something from you folks. Now I know what that little knob that has a picture of a turtle and bunny is for! I did have...

Correct with backhoe mounted you do not have flow to the 3 point.

I would suspect run circuit for fuel shutoff solenoid. Hook up a voltmeter or test lite to wire(s) going to the solenoid to see if you...

Start with the items that are the easiest to access then work your way down the list. Note: if your luck is like mine it will be the...

On most tractors there is a drop rate adjustment knob that is usually located on the panel below the seat. Possibly try opening it a...